807558
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
6.5.1 SELECTING THE CHARGING PROGRAMME
By pressing the MODE button (multiple times), you can
select the appropriate charging programme for your needs.
The charging programmes appear in the following order
and may be selected by pressing the MODE button:
Motorbike 6 V Motorbike 6 V winter
Motorbike 12 V Motorbike 12 V winter
Car 12 V Car 12 V winter
Make sure that the charger is not connected to
the power socket and that the adapter charging
cable is not connected to the battery charger.
When using the adapter charging cable with the
ring eyes, switch all consumers in the vehicle o
before starting the charging process. Never leave
the charging process unattended.
After plugging the mains cable inselect the
desired charging pro- gramme by operating
the MODE button multiple times. If the MODE
button is not pressed, the charging process is not
started. When charging has started it is no
longer possible to switch to another charging
program, If you wish to work with a program
other than the set charging program, pull the
plug out of the socket and wait until the display
has gone dark. Then insert the plug again and
proceed as described above.
6.4.2 CONNECTING THE ADAPTER CHARGING CABLE
WITH EYES
Attach the eye of the red plus cable to the plus connection
cable of your vehicle battery, e.g. the screws of the pole
terminal. Attach the eye of the black minus cable to the
earth connection cable (minus cable) of your battery. Lay
the cable so that it is free from bends and tensions. It may
not be attached in the vicinity of hot or rotating parts of the
motor. The connection plug may not get wet.
6.5 CHARGING THE BATTERY
Connect the adapter charging cable to the charging cable
(Position D in the overview) of the battery charger. Now
connect the mains connection cable (Position A in the
overview) of the battery charger to the power socket. The
background illumination of the display is activated.
If the battery has been connected incorrectly (wrong poles)
or the charger has no contact, the following error message
appears on the display ˝Er1˝. If the error message ˝Er2˝
is shown, a defective 6 V battery has been connected,
this cannot be charged using the battery charger. If the
battery has been correctly connected, the display shows the
current battery voltage and the symbol for the set charging
programme.
CAUTION
CAUTION
Depending on the charging state of the battery, the device
adapts the charging current in order to best charge the
connected battery. The specied maximum charging current
is only used during the main charging phase. Shortly before
the full charging capacity is achieved, the device switches
to a lower charging current. This ensures that the battery is
gently and optimally charged to full capacity.
The battery symbol (Position 7 in the overview) shown on
the display indicates the current lling level of the battery.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16633 - HFGA5DVL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16633 - HFGA5DVL in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info