807559
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
8. NOTES REGARDING ENVIRONMENTAL
PROTECTION
9. CONTACT INFORMATION
The packaging is made up of environmentally
friendly materials which may be disposed of via
your local recycling points. Do not put electrical
devices into the household waste. Electronic
and electrical devices must be collected sepa-
rately and sent for environmentally friendly
recycling. Contact your community or town
administration for information regarding the
disposal of electrics.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
6.6 REMOVING THE CHARGER
Clean the pole callipers every time the charging procedure
is completed. Remove all splashed battery acid from the
pole callipers to prevent corrosion. Clean the device careful-
ly with a dry cloth. Do not use liquids or chemical cleaning
agents. Never submerge the device in liquid. Never allow
liquid to ow over the device.
Properly roll up the cable onto the holders supplied before
storing the device in order to prevent damage to the cables
and the device. Store the device in a dry and clean location.
7.2 CARE
The battery charger is maintenance-free when used in
accordance with the intended purpose.
7.1 MAINTENANCE
7. MAINTENANCE AND CARE
Only for open batteries: Fill the cells with distilled water
up to the level specied by the battery manufacturer. Close
the battery cells with the stoppers.
First pull the plug out of the socket and observe
the sequence for disconnection. This prevents
sparks from forming. Since charging generates a
detonating gas, this is particularly important for
the sake of your safety.
CAUTION
Disconnect the charger from the mains power supply.
Then disconnect the black callipers (minus). Then remove
the battery callipers from the plus pole of the battery (red
callipers).
Allow the battery to cool down.
6.5.2 SELECTING THE CHARGING MODE
If only a small battery is to be charged or normal charging is
sucient, set the switch for charging mode (Position 2 in the
overview) to the „NORMAL“ setting. For large batteries, or if
fast charging is required, set the switch to „FAST“.
Now connect the mains connection cable (Position 10 in the
overview) of the battery charger to the power socket. Now
the green control lamp „ON“ (Position 6 in the overview)
and the yellow control lamp „CHARGING“ (Position 5 in the
overview) light up. The battery is being charged.
Once the battery is fully charged, the batter y charger switches
over to maintenance mode. The green „FULL“ control lamp
(Position 4 in the overview) lights up.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16629 - HB-1206 ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16629 - HB-1206 ES in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info