Manual Apa 16628 - HB-1206 ES (page 9 of 24) (English, German, Dutch, French, Italian)

807562

Zoom out

Zoom in

1/24

Figure 1: View of front

1 Carry handle

2 Switch for selecting charging mode normal/fast

3 Switch for selecting battery type normal/gel

4 Control lamp – Green - Fully charged

5 Control lamp – Yellow - Charging

6 Control lamp – Green - Operating

7 Control lamp – Red - Pole callipers connected incorrectly

6.1 OVERVIEW

6. OPERATING INSTRUCTIONS

Before using the device make sure that you have

read the operating instructions for the battery

and the vehicle and you have understood all of

the safety precautions.

Make sure that the charger is not connected to

the power socket.

Make sure that the charger is not connected to the power

socket. Always connect the red positive cable (+) of the

charger (Position 11 in the overview) to the positive pole of

the battery  rst. Then connect the black minus

cable (-) to the minus pole of the battery. If you charge the

battery in situ, connect the black negative cable (-) to the

car body (exposed part), far away from the battery, the

carburettor and fuel lines. Always maintain this sequence.

CAUTION

When the red control lamp (Position 7 in the

overview) lights up, the charging cables have

been connected incorrectly. Remove the pole

callipers from the battery poles and connect

them correctly.

CAUTION

Figure 2: View of rear

1 Carry handle

8 Mounts for cable holder

9 Type plate

10 Mains connection cable

11 Charging cable

6.2 INSERTING THE CABLE HOLDER

Insert the cable holder into the mounts (Position 8 in the over-

view) on the rear of the charger so that the openings of the

vertically aligned cable holders face away from each other.

6.3 PREPARATION

Clean the battery poles to remove dust and corrosion residue.

Only for open batteries: Remove the plugs of the bat-

tery cells. Check the liquid level in the cells, consult the

operating instructions of your battery for more information.

Replenish only su cient distilled water to ensure that the

minimum  lling level is achieved. The liquid will expand

during the charging process and the battery may over ow.

Leave the cells of the battery open until the end of the

charging process.

In case of closed and maintenance-free batteries, please fol-

low the instructions of the battery manufacturer to the letter.

6.4 CONNECTING THE BATTERY CHARGER

6.5 CHARGING THE BATTERY

6.5.1 SELECTING THE BATTERY TYPE

If a standard lead acid battery, a maintenance-free battery

or an AGM battery is to be charged, set the switch for the

battery type (Position 3 in the overview) to the „NORMAL“

position. For gel batteries, set the switch to „GEL“.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16628 - HB-1206 ES in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Apa 16628 - HB-1206 ES Manual

Product: