801485
9
Zoom out
Zoom in
Previous page
1/47
Next page
ENGLISH
BHS Series | User manual
16
17
User manual | BHS Series 17
BHS 800 BHS 1200 BHS 1800
Subwoofer
(BHS 800S / BHS
1200S / BHS 1800S)
Band-pass cabinet
8” custom ferrite
woofer - 1.5” VC
Bass reflex cabinet
12" custom ferrite
- 2.5” VC
Bass reflex cabinet
15" custom ferrite
- 2.5” VC
Satellite
(800T / 1200T /
1800T)
2-way, full range
LF : 5” / HF : 1”
horn loaded tweeter
2-way, full range
LF : 6.5” / HF : 1”
horn loaded driver
2-way, full range
LF : 8” / HF : 1”
horn loaded driver
Satellites dispersion
(H° x V°) 100 x 60 90 x 60 80 x 60
Frequency response
(entire system) 60Hz-20kHz 50Hz-20kHz 42Hz-20kHz
MAX SPL 120dB 124dB 126dB
Amplication D Class D Class D Class
System peak power 800 W 1200 W 1800 W
Crossover slope and
frequency 24dB/Oct @ 200Hz 24dB/Oct @180Hz 24dB/Oct @ 140Hz
Input and output
connectors
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
Controls
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Protections
Short circuit,
over-current,
Dual-limiter
Short circuit,
over-current,
Dual-limiter
Short circuit,
over-current,
Dual-limiter
6 | TECHNICAL SPECIFICATIONS5 | TROUBLESHOOTING
PROBLEM LED SOLUTION
No sound or very low
sound level
Power LED turned
off.
Make sure the system is properly connected to the
mains outlet. Make sure that mains plug is rmly
inserted into the socket.
Power LED turned
on, but low MAIN
LEVEL.
Turn the MAIN LEVEL knob clockwise.
Make sure the SIG LED is on.
Check the signal cable.
Distortion SIG/CLIP LED
lit red Lower inputs and/or MAIN LEVEL knob.
Led SIG/CLIP
verde
Controllate il livello della sorgente.
Controllate la perfetta connessione fra subwoofer
e i satelliti.
Booming sound
Lower SUB level.
Check satellites connections.
Harsh sound
Raise SUB level.
Lower MAIN LEVEL knob.
Noise / hum
Activate the GND LIFT switch on subwoofer back
panel, if the problem remains, press the GND LIFT
switches of all the ampliers/devices connected
to the system.
Use only balanced cables, avoid using unbalanced
cables.
Try to connect your entire system under the same
electric current line, so that all the equipment
shares the same AC Ground.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT BHS series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT BHS series in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info