801467

ANT B-Twig 8 Manual

10
Zoom out
Zoom in
Previous page
1/59
Next page
ENGLISH
B-TWIG 8 MOBILE | User manual
18
19
User manual | B-TWIG 8 MOBILE
Turning on the unit for the rst time, due to factory setting, this function is disabled.
It is always possible to return to the main menu by pressing the green arrow.
5.5 | ABOUT MENU SCREEN (Fig.6)
Press the ABOUT key to access this menu. Once entered, it is possible to view the
rmware version and recall the factory settings using the dedicated RESTORE
DEFAULT SETTINGS key (Fig.6A)
5.6 | MENU MAIN SCREEN (Fig.7)
Press the MAIN channel to access this menu. Once entered, you can congure
the system with different equalization presets, adjust the DELAY and set the
output mode on the MAIN OUT output. In detail:
PRESET: press on this control and use the rotary knob to choose between the
four presets
PLAYBACK: For music listening and using (CD players, MP3 players, etc.), low
and high frequencies are emphasized.
DJ SOUND: For all situations of background music diffusion. In this case the low
frequencies are extended and enhanced, in order to create a more wrap-around
sound even at low sound level.
5.3.1 | BLUETOOTH® CONNECTION
Make sure the mobile device to be paired is switched on and ready to be connected with
the system:
Activate Bluetooth® synchronization by setting the AUDIO STREAMING control to ON. In this
phase the status LED flashes quickly.
Check that the device searches for the available devices and identies the system showing
the message “B-TWIG 8 MOBILE”.
Select “B-TWIG 8 MOBILE” from the list to synchronize the system with the mobile device.
The status LED remains lit.
Now you can play the selected songs from the connected remote device.
Note: when the data connection via APP is active, a second non-selectable identication
“B-TWIG 8 MOBILE” will appear in the Bluetooth® menu of your mobile device. It is normal
and allows the user to check the data connection between the APP and the system (Fig.4F)
5.4 | CONFIG MENU SCREEN (Fig.5)
Press the CONFIG key to access this menu. Once entered, it is possible to enable or disable
the AUTO STEREO PAIRING and SCREENSAVER functions. In detail:
AUTO STEREO PAIRING ON: if activated, it automatically allows audio and data
synchronization via Bluetooth® between the main unit (Master) and the secondary unit
(Slave). In the factory setting, and when the system is rst turned on, this function is disabled.
SCREENSAVER: if activated, it enables the graphic display to be turned off after 5 seconds
of system inactivity. This function allows you to extend the average life of the display and
to preserve battery life while the system is operating. Press any APP control or the system
control panel to disable the screensaver.
Fig.5
CONFIG
ON
AUTO STEREO
PAIRING
SCREENSAVER OFF
APP
Fig.6 Fig.6A
ABOUT
RESTORING DEFAULT SETTINGS
WILL REMOVE ALL PREFERENCES
THAT YOU CONFIGURED
FOR YOUR AUDIO SETUP.
DO YOU WANT
TO CONTINUE?
YESNO
APP
ABOUT
VERSION 1.0
RESTORE
DEFAULT SETTINGS
APP
Fig.4F
AUDIO
APP
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT B-Twig 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT B-Twig 8 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 13.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info