801467

ANT B-Twig 8 Manual

4
Zoom out
Zoom in
Previous page
1/59
Next page
ENGLISH
B-TWIG 8 MOBILE | User manual
6
7
User manual | B-TWIG 8 MOBILE
life cycle. In order to preserve battery duration
and reliability over time, avoid battery complete
discharge during operation.
13 STATUS
Press for 3 seconds this button to view the charge
status of the internal battery. Reporting occurs
when the system is off (OFF) or when the unit is
connected to the mains with the POWER switch
in the CHARGE position.
14 DIGITAL MATRIX CONTROLLER
LCD control interface and digital menu display; for
details see chapter 5 SYSTEM CONTROL.
15 SETUP/MAIN LEVEL
This rotary knob with integrated push button is the
primary controller of system digital functions. It
allows access to the control menu and adjustment
of the parameters selected according to the
connected devices or application preferences.
It also acts as a classic MAIN LEVEL knob for
adjusting the overall system output volume.
16 SIG/CLIP
Two-color output level indicator
Green LED: the signal is present
Red LED: the signal is very strong and is close
to distortion.
If the red LED lights up continuously, it is necessary
to reduce the MAIN LEVEL level or, otherwise,
adjust the levels/parameters of CH1, CH2, CH3.
7 STEREO AUX IN
Unbalanced input with 3.5mm mini-jack stereo socket.
Connect to this input the signal from an external device such
as Smartphone, Tablet or PC. It is possible to use this input
and the Bluetooth® signal at the same time, but for better
levels management, we do not recommend this option.
8 CHANNEL 3 LEVEL
This control adjusts channel 3 level. Turn the knob clockwise
to increase the volume or counterclockwise to decrease it.
9 LED PAIRING
Status LED for Bluetooth® connection:
- Flashing green light, synchronization and pairing with
the mobile device.
- Steady green light, audio streaming in progress.
To synchronize and connect mobile phones or tablets, refer
to chapter 5 SYSTEM CONTROL.
10 MAIN OUT CONNECTOR
Balanced XLR-M output for connection to another powered
system. The signal of this output depends on the levels of
the input channels. Using the APP menu the output can
be set as LINK OUT or MIX OUT.
11 BATTERY LEVEL
Internal battery status LEDs, in descending order
1st LED: steady green light, battery fully charged
2nd LED: steady green light, battery half charged
3rd LED: steady green light, battery one quarter charged
4th LED: steady red light, battery close to discharging,
recharge the battery as soon as possible.
12 CHARGE LED
While the internal battery is charging, this LED is lit.
When the battery is fully charged, the process stops
automatically and the CHARGE LED turns off.
In order to charge the battery, it is necessary to connect
the power cable to the wall socket and place the POWER
button in CHARGE mode. Battery total charge is achieved
in about 5 hours.
It is also possible to recharge the battery less effectively,
even during system operation connecting the unit to the
mains and moving the POWER button to ON position.
WARNING: Lithium-ion batteries, if fully discharged to zero,
can suffer irreparable damage that abruptly shortens their
14
16
15
10
12 13
8
11
7 9
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT B-Twig 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT B-Twig 8 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 13.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info