801478

ANT ANTMIX series Manual

13
Zoom out
Zoom in
Previous page
1/57
Next page
12
13
14
18
19
20
17
15
16
ENGLISH
ANTMIX Series | User manual
24
25
SERIES
User manual | ANTMIX Series
12 DFX DISPLAY
This display shows the numbers corresponding to selected
effects by the PROGRAM (PUSH) encoder.
Press this button to activate effects unit encoder.
13 PROGRAM
This 100 position selector allows you to choose the type
of effect.
Turn the knob until you reach the desired program, then press
the knob to activate the selected effect.
The rst 10 programs called ECHO reproduce the classic echo
effect with increasing delay in the subsequent variants, ECHO
+ VERB algorithms emulate a combination of echo and reverb,
the impressive effect used in many musical productions, the
TREMOLO effects are mostly used on stringed instruments,
while PLATE, CHORUS, and VOCAL programs offer a pleasant
sound widening and are ideal to strengthen vocals.
The ROTARY effects simulate leslie organ, while the SMALL
ROOM programs reproduce the reverberation of rooms with
similar dimensions to those of residential rooms, alternating
the simulation of reflective and absorbent walls. The FLANGER
+ REV section represents a combination of effects perfect
for different instruments, in particular keyboards, and nally
the LARGE HALL effects package simulate the reverberation
of environments with large volumes characterized by mostly
reflecting, naked walls.
14 DFX TO AUX
This knob sets DFX signal output level for AUX section.
15 PEAK/MUTE
This LED is lit when the signal sent to DFX is too
high, and there's a risk to saturate the internal effect.
It's a good setting of the effect sends when the LED
flashes occasionally, only on signal peaks. When
the LED remains continuously lit, it is an indication
of saturation. In that case please cut the volume of
DFX send. Press the button to MUTE the selected
effect program.
16 PFL & LED
This button activates pre-fade listen of internal effects
unit. It works also if the channel is muted; the led
indicates the activation of the command.
17 DFX RETURN
This fader sets the signal level of the internal effects
unit to the main output.
Use it to increase or decrease the amount of processed
signal to be sent to the MAIN MIX.
18 STEREO RETURN - TO MAIN
This knob sets the signal level of external stereo
effects unit to the main output.
Use it to increase or decrease the amount of processed
signal to be sent to the MAIN MIX.
19 TO AUX
This knob sets the signal level of STEREO RETURN
for AUX send. Use, for example, to adjust the playback
level of the external device connected to STEREO
RETURN input.
20 AUX SEND
This knob sets the overall signal for AUX send.
21 DFX
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT ANTMIX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT ANTMIX series in the language / languages: English, German, Italian as an attachment in your email.

The manual is 8.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info