801478

ANT ANTMIX series Manual

8
Zoom out
Zoom in
Previous page
1/57
Next page
12
13
11
18
19
20
14 1615
17
ENGLISH
ANTMIX Series | User manual
14
15
SERIES
User manual | ANTMIX Series
16 POWER ON
This LED is lit green when the mixer is ON.
17 +48V
This two-position switch allows you to turn ON or OFF the phantom power
for condenser microphones:
ON = Switch to the right, LED lit.
OFF = Switch to the left, LED turned off.
WARNING: To prevent loud noises to your sound system, activate the
phantom power only after lowering the levels of the channels and connecting
the microphones.
18 OUTPUT LEVEL
MAIN MIX output level LED indicators.
19 2-TK IN
This knob sets the level of 2-TRACK IN input signal.
20 TO CTRL/ROOM - TO MAIN MIX
Press this switch to assign 2-TRACK IN input signal to CTRL/ROOM or to
MAIN MIX outputs.
21 PHONES CTRL/ROOM
Adjust this knob to set the level for PHONES and CONTROL ROOM outputs.
22 MAIN MIX
Adjust this knob to set MAIN MIX OUTPUT level.
11 PRESETS
This 16 position selector allows you to choose DSP type of effect.
The rst 4 presets emulate different reverbs characterized by sound reflections within
an environment, the next 4 (5-8) are recommended in particular for voice or percussion
in general, stereo delay reproduce the classical delay effect to main signal, nally, there
are the multi-effect combinations (11-16) generally used for complex effects, useful
for voice and a lot of soloist instruments reinforcement.
12 DFX TO MAIN
This knob sets the signal level of the internal effects unit to the main output.
Use it to increase or decrease the amount of processed signal to be sent to the MAIN MIX.
13 STEREO RETURN
This knob sets the signal level of external stereo effects unit to the main output.
Use it to increase or decrease the amount of processed signal to be sent to the MAIN MIX.
14 PEAK
This LED is lit when the signal sent to DFX is too high, and there's a risk to saturate the
internal effect. It's a good setting of the effect sends when the LED flashes occasionally,
only on signal peaks. When the LED remains continuously lit, it is an indication of
saturation. In that case please cut the volume of DFX POST channel sends.
15 MUTE
This button allows you to enable or disable the return signal of the internal effects unit.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT ANTMIX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT ANTMIX series in the language / languages: English, German, Italian as an attachment in your email.

The manual is 8.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info