738521

Ansmann FM4.0 motor Manual

40
Zoom out
Zoom in
Previous page
1/76
Next page
ORIGINAL OPERATING INSTRUCTIONS - ELECTRIC DRIVE FOR PEDELECS
40
Incorrect handling leads to risk such as explosion, overheating
or fire. Failure to observe the instruction for use will lead to pre-
mature wear or other defects. Keep these instructions in a safe
place and be sure to include them if you give the battery to ano-
ther user.
After charging the battery, remove the power plug of the charger from the
mains outlet and disconnect the charging plug from the charging socket
of the battery. Close the cap on the charging socket again to prevent the
ingress of water and avoid corrosion.
The battery has a capacity indicator for checking the charge level. This is
done briefly pressing the button on the capacity indicator. Then the charge
level is displayed for a short time with LEDs. In driving mode the battery
level can be read from the display at the handlebar.
12. WIRING
As the central unit of the electric drive is defined, the motor controller.
At this control unit the components motor, display, brake levers and pe-
dal sensor have to be connected according to the following connection
diagram. As all plugs have different shape / size, incorrect connection of
these components is largely excluded. Only the wires of the motor cable
should be connected according to colors correctly to the motor controller.
It is essential to ensure tightness of connections to prevent malfunctions
due to lack of contact. The control unit and the cable over lengths are
then stowed in the controller box. Optional can be connected to terminal
L3 (POWER) a light module.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ansmann FM4.0 motor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ansmann FM4.0 motor in the language / languages: English, German, Italian as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info