722105

Anker Soundcore Spirit Dot 2 Manual

2
Zoom out
Zoom in
Previous page
1/79
Next page
01 EN EN 02
Charging
• Slide to open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the rst use.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
LED behavior (Earbuds)
Flashing red once every 1 minute Low battery
Steady white Being charged
Light off Fully charged
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON
OFF
• To manually power on, press and hold the multi-function button on both earbuds for 2
seconds until the LED indicators turn white for 1 second.
• To manually power off, press and hold the multi-function button on both earbuds for 8
seconds until the LED indicators turn red for 1 second.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behavior (Earbuds)
Flashing white TWS connecting
Rapidly ashing white (Primary earbud)
Slowly ashing white (Secondary earbud)
TWS connected
• The right earbud is the primary earbud by default. In TWS mode, place either one of the
earbuds into the charging case, the other one will switch to be the primary earbud.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
Bluetooth Pairing with your Device
1. Take earbuds out of the charging case or manually power on the earbuds, wait for 1 to 3
seconds until the LED indicator on one of the earbuds ashes white, then earbuds enter
the Bluetooth pairing mode successfully.
2. Turn on Bluetooth on your device and click
“Soundcore Spirit Dot 2”
. The LED indicators
on both earbuds will turn white for 1 second when Bluetooth connected.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Anker Soundcore Spirit Dot 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Anker Soundcore Spirit Dot 2 in the language / languages: All languages as an attachment in your email.

The manual is 8,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info