Manual Anker Soundcore Flare 2 (page 66 of 79) (All languages)

722078

Zoom out

Zoom in

1/79

CN 129 130 CN

蓝牙配对

FLARE 2

<2”

Soundcore Flare 2

FLARE 2 FLARE 2

按下进入蓝牙配对模式

蓝色闪烁蓝牙配对

蓝色常亮蓝牙已连接

• 打开电源后，如果上次连接的设备在蓝牙范围内，音箱将自动连接到该设备。如

果未曾连接设备，请按下蓝牙按钮进入蓝牙配对模式。

• 要与另一台设备配对，请按下蓝牙按钮重新进入配对模式。

PartyCast 模式

将一个 Flare 2 设置为主音箱，并将其与超过 100 个辅助 Flare 2 音箱连接，即可控制音频以及所

有灯光效果。

设置主音箱：

1. 通过蓝牙将一个 Flare 2 音箱连接至您的手机或其他设备。成功连接后，蓝牙 LED 指示灯将变

为蓝色。

2. 按住此 Flare 2 上的蓝牙按钮 3 秒钟，当您听到提示音且蓝牙 LED 指示灯呈白色闪烁时，即表

明此 Flare 2 已设置为主音箱。

• 主音箱上的蓝牙 LED 指示灯将呈白色闪烁。

连接辅助音箱：

1. 请确保辅助音箱未连接至任何蓝牙设备。

• 按下蓝牙按钮，即可将 Flare 2 与设备断开连接，蓝牙 LED 指示灯将呈蓝色闪烁。

2. 按下蓝牙按钮 3 秒钟，当您听到提示音且蓝牙 LED 指示灯呈白色闪烁时，即表明辅助音箱处

于连接模式。

3. 当辅助音箱靠近主音箱时，它们将自动连接到主音箱。成功连接后，主音箱上的蓝牙 LED 指

示灯将继续呈白色闪烁，而辅助音箱上的蓝牙 LED 指示灯将变为白色。

FLARE 2

>3”

FLARE 2

成功进入 PartyCast 模式后：

• 您只需控制主音箱，就可对所有音箱进行关闭电源、调整音量或切换灯光效果等操作；

• 您可以分别关闭每个辅助音箱的电源或切换其灯光效果；

• 您无法分别调整每个辅助音箱的音量；

• 要退出 PartyCast 模式，请按下主音箱或辅助音箱上的蓝牙按钮 3 秒钟，直到蓝牙 LED 指示

灯呈蓝色闪烁。

按钮控制

播放 / 暂停 X1 按下

下一曲目 X2 按两次

上一曲目 X3 按三次

低音增强打开 / 关闭 X1 按下

音量升高 / 降低按下

When I increase the volume on my soundcard flare 2 speaker the Bluetooth connection goes on and off until volume is decreases. Thanks Submitted on 28-3-2021 at 07:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Anker Soundcore Flare 2 in the language / languages: All languages as an attachment in your email.

The manual is 22,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Anker Soundcore Flare 2 Manual

Product: