706166
2
Zoom out
Zoom in
Previous page
1/12
Next page
If your connection type isnt PPPOE or DHCP, then you will need to change your
Wan settings.
Step 1: Configure WAN settings.
Click Network > Wan. Then click Config and select the right option from the
Internet Connection Type list. If your method of connecting to the Internet is not
Dynamic IP, then you will need to input any required information provided by your
Internet Service Provider (ISP).
Step 2: Click Save to let the device reboot once you have been asked. Wait two
minutes to let the Anker router reboot.
1. Other types of Internet connections
SSID: Your SSID refers to the name of your wireless network. By default, these
network SSIDs are named "Anker N600 2.4G" and "Anker N600 5G". If you would
like to customize these names, please note that identical names for the 2.4G and
5G SSIDs will enable automatic Wi-Fi switching between the two bands. As
different wireless devices handle automatic switching differently, we recommend
that you choose distinct names for each band. Please refer to FAQ Question 14
and 15 for details.
Channel:
2. Changing the Country Service Set Identifier (SSID) and Channel.
1
Step 1: Click Wireless > Basic, then choose either 5G or 2.4G.
Note: If you have connected your computer to the Anker router via the 2.4G
wireless signal, you need to choose 5G first, and vice versa.
Step 2: Update "Country" "SSID" and "Channel".
Country: The default setting is "US", you can update it to your current country.
Note: By default, the Channel setting is "auto", which means that the Anker
router will choose the best channel according to its wireless surroundings. You
can set the statistic channel if the channel you are on is very crowded. Under 2.4
G band,normally we suggest that you choose from among channels 1, 6, and 11
(14) because they are the most stable and experience the least interference.
Step 3: Click Save and wait 10 seconds for the router to restart.
Step 4: Open a new tab and select the same settings as listed above.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Anker N600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Anker N600 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Anker N600

Anker N600 Manual - English - 9 pages

Anker N600 Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info