696270
18
Zoom out
Zoom in
Previous page
1/44
Next page
18
ANIMO living warmth.
ASSEMBLY
ASSEMBLY
COMBUSTION AIR DISCHARGE
Connection to a solid fuel approved chimney
(diameter =120 mm)
• Correct air-tight installation of the flue gas inlet
• Exclusive use of heat-resistant sealing materials
The stovepipe must not project into the open sec-
tion of the chimney
The flue gas path must not be of excessive length
(horizontal < 1.5 m)
Few changes in direction of the flue gas flow to the
chimney are the best solution.
A maximum of 3 bends in the flue gas pipe should
be permitted
Where there is no direct and straight connection to
the chimney use and adapter with cleaning access
Connect the stove to the chimney with the stov-
epipe
Connect to the mains with the approx. 2.5 m long
connection power cable with Euro plug (connec-
tion to a 230 Volt, 50 Hz mains source), ensure that
any contact of the cable and hot or sharp edged
surfaces is avoided.
Observe all applicable regional construction
regulations and contact your local chimney
sweep about this!
FRESH AIR SUPPLY
Stoves without an external combustion air supply
link draw the air they need from the living area. Air
your living space several times a day to prevent ne-
gative pressure in the rooms or poor combustion.
Stoves with an external combustion air connection:
Steel, HT or exible aluminium pipe (diameter =
50 mm or 2 inch)
For longer connecting pipe lengths of above 1 m
increase the diameter to 100 mm
To ensure an adequate air supply the pipe should
be no longer than approx. 4 m and have as few
bends as possible
Pipes leading from the outdoors must be provided
with a windshield hood.
In extremely cold conditions ensure that the air
opening never ices up.
You can also draw combustion air direct from
other adequately ventilated rooms (basement).
The assembly must
be carried out by
authorised specialists
only. The following points
must be taken into account:
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Animo Adevo - Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Animo Adevo - Pellet in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info