575678
24
Zoom out
Zoom in
Previous page
1/54
Next page
FALSE ALARMS
Turn OFF the Nursery Unit.
Verify the connection between Sensor Pad and Nursery Unit.
Unplug and reconnect the cord.
Make sure there is no bedding between mattress and Sensor Pad.
If the crib has a spring or slat base, place a hardboard between the crib base
and the Sensor Pad measuring at least 13” x 13” (33x33 cm) and 1/4” (6 mm) thick.
Make sure Sensor Pad is positioned as described under the setup requirements.
Sensor Pad Sensitivity level may need to be adjusted, refer to Step 5.1.
ALARM WILL NOT SOUND
Avoid contact with the crib when the monitor is ON.
Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement
from outside the crib.
You may need to decrease the sensitivity, refer to Step 5.1.
Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.
NO SOUND IS BEING TRANSMITTED
Ensure that both units are switched ON.
If there is no power to any unit check/replace the batteries, recharge the Parent Unit
& check the AC Adaptors are working. Change electrical outlets if required.
Check on the Parent Unit screen to see if the monitor is in MUTE mode instead of ON
mode. Refer to Step 6.6 and increase volume level.
Bring the Parent Unit and Nursery Unit closer together.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
Check the connections or change to another electrical outlet.
Push and hold the left ‘wing’ for 2 seconds to turn the Nursery Unit ON.
WEAK RECEPTION
Bring the units closer together.
Change the position of one or both units.
Place the units on a flat surface away from baby’s reach.
Replace the batteries or recharge the Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
Rotate the Parent Unit or move it away from source of interference.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC701 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC701

Angelcare AC701 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info