575676
26
Zoom out
Zoom in
Previous page
1/29
Next page
FALSE ALARMS
Verify the connection between the Sensor Pad and the Nursery Unit. Unplug and
reconnect the cord.
Make sure there is no bedding between the mattress and the Sensor Pad.
If the crib has a spring or slat base, place a hardboard between the crib base and
the Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4 inch (6 mm) thick.
Make sure the Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to Step 5.3.
ALARM WILL NOT SOUND
Avoid contact with the crib when the monitor is ON.
Place the crib near a solid supporting wall to avoid Sensor Pad from detecting
movement from outside the crib.
You may need to increase the sensitivity, refer to Step 5.3.
NO SOUND IS BEING TRANSMITTED
Ensure that both units are switched ON.
Check that the sound has not been turned down on the Parent Unit. Increase
the volume level on the Parent Unit, refer to Step 5.5.
Check on the Parent Unit screen to see if the monitor is in temporary MUTE mode
instead of ON mode. Deactivate the temporary MUTE function, refer to Step 5.6.
If there is no power to any unit check/replace the batteries, recharge the Parent Unit
& check the AC Adaptors are working. Change electrical outlets if required.
Bring the Parent Unit and the Nursery Unit closer together.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
Turn the switch behind the left wing ON.
Check connections or change to another electrical outlet.
WEAK RECEPTION
Bring units closer together.
Change the position of one or both units.
Place units on a flat surface away from baby’s reach.
Replace the batteries or recharge Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
Rotate the Parent Unit or move it away from source of interference.
Try a different channel, refer to Step 4.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
Move the units farther apart (at least 10 feet/3 meters apart).
Decrease the volume on the Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
Turn the Parent Unit back ON by pushing and holding the power button.
Replace the batteries or recharge the Parent Unit.
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC403 in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC403

Angelcare AC403 User Manual - Dutch - 30 pages

Angelcare AC403 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info