537056
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
Other Functions (continued)
PAGING THE PARENT UNIT
Press the TOP BUTTON of the Nursery Unit to
locate the Parent Unit.
1. PAIRING/PAGING BUTTON
PAGING
1
PART 4 - FREQUENTLY ASKED QUESTIONS
Q. MY MONITOR KEEPS BEEPING/
ALARMING AS I SET IT UP
A. Your monitor (Nursery Unit) is already
pre-programmed to record movement
(and sound). This means that as soon as
the nursery unit receives mains or battery
power, it will start to record movements
(whether or not the SensorPad is plugged
into the nursery unit.) If no movement is
detected the alarm will sound after 15
seconds and will be signalled by one
short beep (rouse alarm), and then 5
seconds later, loud beeps in rapid
succession. To stop the alarm sounding
turn off the Nursery Unit (using the Power
ON/OFF - left wing), and insert the jack
from the SensorPad (if not already
inserted). Turn on the unit and place your
hand on the sensor pad and tap lightly
(simulating movement from your baby).
As movement is detected the green light
on the Nursery Unit will be flashing,
indicating that the unit is picking up
movement. Now remove your hand from
the sensor pad and stand still until the
green light stops flashing and you will
hear first the rouse alarm, which is a
short beep, and then the main alarm.
This shows that your monitor is
working properly.
Q. I DON’T WANT TO MONITOR
MOVEMENT WHILST MY BABY IS IN
THE COT NEXT TO MY BED?
A. It is easy to change any settings on your
monitor, by following the instructions in
the manual.
Your Parent Unit is used to remotely
transmit any changes you wish to make
to your Nursery Unit.
You can reactivate or deactivate
movement or sound as your needs
change.
NOTE: If your monitor is set up to record
movement, please ensure that the cot is
not touching your bed as it could be
picking up your movements instead of
your baby’s.
Q. WHAT DO THE ALARMS SOUND LIKE?
A. MOVEMENT ALARM - Single short beep
followed by rapid loud beeps.
There are a sequence of alarms that you
will hear when the monitor is recording
movement. Should the sensor pad not
detect movement for 15 seconds, then a
‘Rouse’ alarm will sound. This is a single
beep and may wake baby from a deep
sleep. If the sensor pad does not pick up
any movement in the 5 seconds following
the rouse alarm then the main alarm will
sound. This sounds like a rapid
succession of loud beeps that are audible
from a distance.
There is a small loudspeaker on the
nursery unit which emits this sound. Also
the nursery unit transmits this sound to
the parent unit which, if is turned on will
also emit the alarm sound. The parent
unit can also be set up to vibrate as a
means of alarm.
OTHER ALARMS
Out of Range
Replace Batteries
HOLD Function
Temperature Warning
Short low
volume beeps
Soft short
beeps that are
merely a
gentle warning
to remind you
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC401

Angelcare AC401 User Manual - German, Dutch, Danish, French, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info