Manual Angelcare AC401-A (page 25 of 58) (English, French, Spanish)

681987

Zoom out

Zoom in

1/58

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERIES

• Ensure that you fully charge your batteries for 15 hours before their first use.

• To maintain maximum battery life it is recommended that you fully discharge your

batteries periodically. Battery performance can be diminished by leaving the batteries

constantly charging. If your parent unit is not in use, please turn it OFF.

• Inadequate battery power can impair the performance of your monitor. If you are

not happy with the performance of your Parent Unit/Monitor please replace the

rechargeable batteries (4 or 8 x NiMH Rechargeable Batteries).

• It is advisable to change the batteries every 6 months.

LOSS OF CONNECTIVITY

• In the case of loss of connectivity, the first step is to bring the Parent Unit and

Nursery Unit closer together and make sure that both units are ON to restore

the connection. If there is still no connection and no out of range warning after the

above has been done, then and only then should the re-connection procedure below

be done.

1) Turn the Nursery Unit and the Parent Unit

OFF.

2) Turn ON the Parent unit - press and hold

the MENU button. The Out-of-Range

alarm will flash and you will hear a beep.

3) Turn ON the Nursery Unit and - press and

hold the top button to reconnect. The TIC

light will flash within a few seconds and

you will hear a confirmation beep.

4) You will know your reconnection was

successful when C1 appears on the Parent

Unit display, then normal screen will

appear.

NOTE:

The connection process should be done

within 30 seconds, if you ignore or it takes

longer then you will need to restart the

steps.

FALSE ALARMS

• Turn OFF the Nursery Unit.

• Verify the connection between Sensor Pad and the Nursery Unit. Unplug and reconnect

the cord.

• Make sure there is no bedding between mattress and the Sensor Pad.

• If the crib has a spring or slat base, place a hardboard between the crib base and the

Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4 inch (6 mm) thick.

• Make sure Sensor Pad is positioned as described under the setup requirements.

Sensitivity may need to be adjusted, refer to Step 5.3.

Re-connection procedure:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401-A in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC401-A Manual

Product: