Manual Angelcare AC401-A (page 14 of 58) (English, French, Spanish)

681987

Zoom out

Zoom in

1/58

STEP 4 - TURNING ON YOUR MONITOR

1) Press the Parent Unit ON/OFF button

for 2 seconds.

2) Slide ON the Nursery Unit Power

ON/OFF button.

NOTE:

The screen of the Parent Unit will show the

channel of transmission (C1 to C8) and after

5 seconds the room temperature and

function icons.

The connecting process should be done

within 30 seconds. If longer, the operation

will be ignored and you will have to start over.

CHANNEL SELECTION

1 2

When Parent Unit is turned ON

and Nursery Unit is OFF:

• No channel icon will

appear and Nusery Unit

icon will blink.

• Parent Unit will start

beeping after 1 minute.

5 seconds after beeping,

unit will shut itself OFF.

1) Press and hold the SELECT button

to enter channel mode.

2) Pressing either the UP or DOWN arrow

will change the channel your monitor

transmits on (C1 to C8).

3) Press the SELECT button again to

confirm your channel selection.

NOTE :

If the transmission is not clear, or if you hear

interferrence sounds, you should change

the channel.

TO SELECT THE CHANNEL:

If there is a lost connection

between the 2 units

(refer to troubleshooting):

• The Out-of-Range icon will

blink on the screen and the

Parent Unit will beep.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401-A in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC401-A Manual

Product: