682016
21
Zoom out
Zoom in
Previous page
1/25
Next page
TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERY
Ensure that you fully charge your battery for 9 hours before first use.
To maintain maximum battery life it is recommended that you fully discharge your battery
periodically. If your Parent Unit is not in use, please turn it OFF.
LOSS OF CONNECTIVITY
In the case of loss of connectivity, the first step is to bring the Parent Unit and Camera
closer together and make sure that both units are ON to restore the connection. If there is
still no connection and no out-of-range warning after the above has been done, then and
only then should the re-connection procedure below be done.
1) Turn both Unit OFF
2) Turn the Nursery Unit ON.
3) Press and hold the Pause button on the
Camera till the Power Indicator Light blinks
green, then release the button.
4) Turn the Parent Unit ON.
5) Whilst still pressing the Zoom button,
quickly press and release the ON/OFF
button.
6) The Parent Unit will display a forward
icon during the reconnection procedure.
The reconnection is successful if Parent
unit shows the camera view. The Zoom
button can be release.
FALSE ALARMS
Turn OFF the Camera.
Verify the connection between the Sensor Pad and the Camera. Unplug and reconnect the
cord.
Make sure there is no bedding between the mattress and the Sensor Pad.
If the cot has a spring or slat base, place a hardboard between the cot base and the
Sensor Pad measuring at least 33 x 33 cm and 6 mm thick.
Make sure the Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to Step 5.1.
ALARM WILL NOT SOUND
Avoid contact with the cot when the monitor is ON.
Place cot near a solid supporting wall to avoid Sensor Pad from detecting movement from
outside the cot.
You may need to decrease the sensitivity, refer to Step 5.1.
3
5
6
20
01CFO2A_Manuel_AC215_EN_UK_12647.indd 20 17-12-19 07:51
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC215 in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info