1822
6
Zoom out
Zoom in
Previous page
1/56
Next page
6
20) Antenna -The antenna used for this transmitter
must be installed to provide a separation distance of
at least 20 cm (7.9”) from all persons and must not
be collocated or operating in conjunction with any
other antenna or transmitter.
21) Power Lines- An outside antenna system should
NOT be located in the vicinity of overhead power
lines or other electric light or power circuit, or where
it can fall into such power lines or circuits as contact
with them may be fatal.
22) STRANGULATION HAZARD. Children have
STRANGLED in cords. Keep the adapter cords and
sensor pad cord out of the reach of children.
Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should NEVER
place the nursery unit within 3 feet (1 meter) of a crib.
NEVER use extension cords with AC adapters.
ONLY use the AC adapters provided.
23) Interference- This monitor uses public airwaves
to transmit signals. The Parent Unit may pick up
signals or interference from other nursery monitors in
your area. Your monitor may even be picked up by
other households. To protect your privacy, make sure
both units are turned off when not in use. If you expe-
rience interference, change the channel on both
units.
24) Vibration Source- When the monitor is in use, do
NOT use a crib mobile or other crib accessories that
may produce vibrations. Other sources of vibrations
may include fans, washing machines, loud music,
etc. These sources of vibration may interfere with the
performance of your Angelcare® monitor and the
alarm will not sound if it continues to detect any
movement other than your baby’s. Be sure all vibra-
tion sources are eliminated before using the monitor.
You may experience false alarms for several rea-
sons. The most common reason is the Nursery Unit
has not been turned off after you have removed your
baby from the crib. Another reason is the Sensor Pad
has not been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface with
the printed side facing up. The sensitivity level may
also need to be adjusted. Refer to the Movement
Sensitivity Adjustment section. Always be sure to
immediately check on baby whenever an alarm
sounds.
25) Sensor Pad- Your sensor pad can be used in any
crib that is stationary and designed to safely hold a
baby. If the crib has a spring or slat base, place a
hard board between the crib base and the Sensor
Pad measuring at least 13” x 13” (33 x 33 cm) and
1/4 inch (6 mm) thick. Only use your Angelcare®
monitor in a stationary sleeping environment such as
a crib where the Sensor Pad can rest on a complete-
ly flat, firm surface.
ALWAYS route the sensor pad cord below crib mat-
tress ONLY and out of reach of children.
IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
1) Use ONLY the type and size of batteries specified
in the user manual. There is a risk of explosion if bat-
teries are replaced with an incorrect type.
2) ONLY use the AC adapters included with your
monitor.
3) Do NOT use these adapters with any other equip-
ments.
4) When unplugging the AC adapter from the nursery
unit, be sure it is switched to the off position. If it isn’t,
the unit will revert to battery mode if batteries are
installed.
5) Do NOT dispose batteries in fire. They may
explode. Check with local regulations for possible
special disposal instructions.
6) Exercise care in handling batteries in order not to
short out the batteries with conducting materials
such as rings, bracelets and keys. Overcharging,
short circuiting, reverse charging, mutilation, or incin-
eration of batteries must be avoided to prevent one
or more of the following occurrences: release of toxic
materials, release of hydrogen and/or oxygen gas,
rise in surface temperature.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC201 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC201

Angelcare AC201 User Manual - English - 7 pages

Angelcare AC201 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info