Manual Angelcare AC201-2P (page 14 of 56) (English, French, Spanish)

681983

Zoom out

Zoom in

1/56

Special Features

Movement Sensitivity Adjustment

The movement sensitivity adjustment dial has been preset to a level which will suit most sit-

uations. The highest sensitivity level is 5 (most sensitive) and the lowest sensitivity level is 1

(least sensitive).

You may get false alarms if your baby is in a very deep sleep or has moved to the edge of the crib. If you get

false alarms due to these circumstances, you should increase the sensitivity level by using the sensitivity dial

on the back of the Nursery Unit.

NOTE: Adjust the sensitivity level if you receive false alarms and you have followed the advice in the

Troubleshooting section for false alarms. Make a note of the position of the sensitivity dial before you change

it should you wish to return to that setting.

To increase the sensitivity level, start by increasing it by half a level. For example, if the level is currently at

2.5, increase it to 3. Use the monitor as you normally would. If you still experience false alarms, increase it by

another half level. If you are still experiencing false alarms when you have reached level 5, please consult our

customer service link on our website at www.angelcare-monitor.com

Because the Sensor Pad may detect movement from many sources from both inside and outside your baby’s

room, be sure all vibration sources are eliminated before changing the movement sensitivity level. Check to

see if the Sensor Pad is resting on a flat, firm surface. Place the crib near a solid supporting wall and away

from strong air currents. Do not use crib mobiles or accessories that may cause vibrations. Avoid contact with

the crib when monitor is in use.

To make sure you have avoided all external sources of vibration, take your baby out of the crib while the mon-

itor is on. If the alarm does not sound after you take your baby out of the crib, the sensitivity level may need

to be decreased. To decrease the sensitivity level, adjust by half a level by going from 2.5 to 2. If you are still

experiencing this problem when the level is set to 1, please consult our customer service link on our website

at www.angekcare-monitor.com

Sound Lights

The Parent Unit features Sound Lights so you can “see” your baby’s sounds if background noise prevents you

from hearing your baby. As the sounds get louder, more lights illuminate.

Optional “Tic” Feature

When the “Tic” feature is selected, the Parent Unit will continuously tick as your baby’s movement is detected by

the Sensor Pad. If no movement is detected, the ticking will stop. If you do not want to hear the ticking, slide

the switch to the “Tic Off” position.

Movement Indicators

The Movement Indicator Light is located only on the Nursery Unit. When the Nursery Unit is set to “Sound &

Movement” or “Tic Off,” the Movement Indicator Light will flash green with your baby's every movement. The

flashing green light will let you know that movement is being detected. This will allow you to check on your

sleeping baby in the dark without disturbing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC201-2P in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC201-2P Manual

Product: