Manual Angelcare AC201-2P (page 6 of 56) (English, French, Spanish)

681983

Zoom out

Zoom in

1/56

20) Antenna -The antenna used for this transmitter

must be installed to provide a separation distance of

at least 20 cm (7.9”) from all persons and must not

be collocated or operating in conjunction with any

other antenna or transmitter.

21) Power Lines- An outside antenna system should

NOT be located in the vicinity of overhead power

lines or other electric light or power circuit, or where

it can fall into such power lines or circuits as contact

with them may be fatal.

22) STRANGULATION HAZARD. Children have

STRANGLED in cords. Keep the adapter cords and

sensor pad cord out of the reach of children.

Because of the serious strangulation risk to infants

and toddlers, parents and caregivers should NEVER

place the nursery unit within 3 feet (1 meter) of a crib.

NEVER use extension cords with AC adapters.

ONLY use the AC adapters provided.

23) Interference- This monitor uses public airwaves

to transmit signals. The Parent Unit may pick up

signals or interference from other nursery monitors in

your area. Your monitor may even be picked up by

other households. To protect your privacy, make sure

both units are turned off when not in use. If you expe-

rience interference, change the channel on both

units.

24) Vibration Source- When the monitor is in use, do

NOT use a crib mobile or other crib accessories that

may produce vibrations. Other sources of vibrations

may include fans, washing machines, loud music,

etc. These sources of vibration may interfere with the

performance of your Angelcare® monitor and the

alarm will not sound if it continues to detect any

movement other than your baby’s. Be sure all vibra-

tion sources are eliminated before using the monitor.

You may experience false alarms for several rea-

sons. The most common reason is the Nursery Unit

has not been turned off after you have removed your

baby from the crib. Another reason is the Sensor Pad

has not been placed under the mattress properly.

Be sure the Sensor Pad is on a flat, firm surface with

the printed side facing up. The sensitivity level may

also need to be adjusted. Refer to the Movement

Sensitivity Adjustment section. Always be sure to

immediately check on baby whenever an alarm

sounds.

25) Sensor Pad- Your sensor pad can be used in any

crib that is stationary and designed to safely hold a

baby. If the crib has a spring or slat base, place a

hard board between the crib base and the Sensor

Pad measuring at least 13” x 13” (33 x 33 cm) and

1/4 inch (6 mm) thick. Only use your Angelcare®

monitor in a stationary sleeping environment such as

a crib where the Sensor Pad can rest on a complete-

ly flat, firm surface.

ALWAYS route the sensor pad cord below crib mat-

tress ONLY and out of reach of children.

IMPORTANT SAFETY INSTRUCTIONS

RELATED TO USE OF BATTERIES

1) Use ONLY the type and size of batteries specified

in the user manual. There is a risk of explosion if bat-

teries are replaced with an incorrect type.

2) ONLY use the AC adapters included with your

monitor.

3) Do NOT use these adapters with any other equip-

ments.

4) When unplugging the AC adapter from the nursery

unit, be sure it is switched to the off position. If it isn’t,

the unit will revert to battery mode if batteries are

installed.

5) Do NOT dispose batteries in fire. They may

explode. Check with local regulations for possible

special disposal instructions.

6) Exercise care in handling batteries in order not to

short out the batteries with conducting materials

such as rings, bracelets and keys. Overcharging,

short circuiting, reverse charging, mutilation, or incin-

eration of batteries must be avoided to prevent one

or more of the following occurrences: release of toxic

materials, release of hydrogen and/or oxygen gas,

rise in surface temperature.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC201-2P in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC201-2P Manual

Product: