681981

Angelcare AC115 Manual

19
Zoom out
Zoom in
Previous page
1/68
Next page
LOSS OF CONNECTIVITY BETWEEN THE PARENT UNIT AND THE NURSERY UNIT
• In the case of loss of connectivity, the first step is to bring the Parent Unit and Nursery Unit closer together
and make sure that both units are ON to restore the connection. If there is still no connection and no out-of-
range warning after the above has been done, then and only then should the re-connection procedure below
be done.
3
1) Turn Parent Unit OFF.
2) Turn Nursery Unit OFF and then turn it ON.
3) Press the Power ON/OFF button on the Nursery
Unit 4 consecutive times.
e Sensor Pad Indicator
Light on the Nursery Unit
will flash quickly in green
(indicates Nursery Unit is in
linking mode).
GREEN
5
6
4) Turn the Parent Unit ON. e Out-of-Range
icon should blink.
5) Press and hold the Talk Back button on the
Parent Unit until a beep tone is heard.
6) Press OK button on the Parent Unit. e Out-of-
Range
icon should blink faster to indicate
that the Parent Unit is in linking mode.
e Parent Unit will display H1-H2 icon during the reconnection
procedure. e reconnection is successful if the Parent unit
shows the regular screen view.
FALSE ALARMS
• Turn OFF the Nursery Unit.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the crib has a spring or slat base, place a hardboard between the crib base and the Sensor Pad measuring
at least 1/4’’ (6 mm) thick and should have minimum dimensions of 13’’ x 13’’ (33 x 33 cm).
• Make sure the Sensor Pad is positioned as described under the setup requirements.
• You may need to increase the sensitivity, refer to Step 5.4.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is ON.
• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement
from outside the crib.
• Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.
• You may need to decrease the sensitivity, refer to Step 5.4.
19
E
N
241AC_Manuel_AC115_NA_m3.indd 19 18-03-02 09:40
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC115 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info