Manual Angelcare AC115 (page 12 of 68) (English, French, Spanish)

681981

Zoom out

Zoom in

1/68

SET THE TIC FUNCTION

Allows you to detect baby’s movements as well as hear a TIC sound.

IMPORTANT

To activate the ‘’TIC’’ Function, the movement detection activated.

1) Press and HOLD the MENU Button then press

the OK button until the “TIC”

icon blinks.

2) Use the UP and DOWN arrows to activate or

deactivate the TIC function.

3) Press the OK button to go to the next setting

or press the EXIT button to conﬁrm your

choice.

TO TEST THE SENSOR PAD

MOVEMENT FUNCTION NEEDS TO BE ACTIVATED:

1 2

1) Move your hand lightly on the mattress.

NOTE:

e Parent Unit will emit a

“TIC” sound (when activated) and will ﬂash

every 5 seconds.

2) Remove your hand from the mattress.

After 15 seconds you will hear a

“TIC” pre-alarm sound, and 5 seconds

later the Movement Alarm will trigger.

3) Repeat by moving your hand lightly

in all four corners of the mattress.

MOVEMENT ALARM

• If NO movement is detected after 15 seconds you will hear

a single “TIC” pre-alarm sound from the Nursery Unit.

• If after a further 5 seconds there is still NO movement

detected on the surface of the mattress, the Parent Unit

and Nursery Unit will emit loud continuous beeps

- this is the Movement Alarm.

• Nursery Unit light will ﬂash red.

• Sensor Pad Icon and sound level bar on Parent Unit will ﬂash.

IF THE ALARM DOES NOT SOUND

• Avoid contact with crib while Sensor Pad is in operation.

• Place crib near a supporting wall.

• Adjust Sensor Pad sensitivity level.

• Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.

241AC_Manuel_AC115_NA_m3.indd 12 18-03-02 09:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC115 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC115 Manual

Product: