681980
21
Zoom out
Zoom in
Previous page
1/28
Next page
1) Retire la cubierta de la batería con una moneda. Gírela en la
dirección de la flecha.
2) Coloque la batería suministrada (CR3032) en el
compartimento. Nota: El símbolo + debe quedar hacia arriba.
3) Reemplace el compartimento de la batería (los dos puntos
quedarán alineados). La almohadilla del sensor ahora está
ENCENDIDA.
2.2  INSTALE LA ALMOHADILLA DEL SENSOR EN EL SOPORTE DEL COLCHÓN:
IMPORTANTE
Si la cuna no tiene una superficie sólida y estable para la almohadilla del sensor, deberá colocar
un soporte debajo para garantizar el funcionamiento correcto del sistema.
Esta tabla dura debe tener al menos 6 mm (1/4”) de grosor y unas dimensiones mínimas
de 33 cm x 33 cm (13’’ x 13’’). La tabla debe ser además más grande que la superficie de la
almohadilla del sensor.
La almohadilla del sensor funciona en colchones de cualquier tipo, excepto en los colchones
de espuma viscoelástica, los colchones de marco hueco y las camas de agua. La tabla dura
mantiene una presión constante en la almohadilla del sensor que le permite detectar los
movimientos del bebé incluso si este se encuentra en los bordes de la cuna.
Tabla dura
Almohadilla del sensor
2
1) Retire el colchón de la cuna.
2) Coloque la almohadilla del sensor con el logotipo
de Angelcare
®
hacia arriba encima de la tabla
dura. Debería centrarse en la tabla dura si la
cuna necesita este tipo de soporte.
3) Vuelva a colocar el colchón.
ADVERTENCIA-
La almohadilla del sensor no se ha diseñado para su empleo con adultos, niños ni bebés de más de 24 meses.
Deberá dejar de utilizarla cuando el bebé alcance los 24 meses de edad. Saque la almohadilla del sensor de la
cuna y guárdela para utilizarla en otro momento.
ANTES DEL PRIMER USO: para probar que la unidad está lista para su uso, consulte el manual de instrucciones
sobre cómo comprobar que la instalación se ha realizado correctamente.
PASO 3  ENCENDIDO DEL VIGILABEBÉS
Presione el botón ON/OFF (Encendido/
Apagado) de la unidad del bebé
durante 2 segundos hasta que
la luz indicadora parpadee verde
lentamente.
La unidad del bebé emitirá un sonido con una luz azul para
confirmar que se conectó con la almohadilla del sensor.
NOTA:
Si se enciende una luz roja en vez de una verde,
o si suena una falsa alarma, ajuste el nivel de
sensibilidad (Paso 4.3).
21
E
S
03m11_Manuel_AC017_NA_12643.indd 21 2018-01-29 2:02 PM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC017 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info