Manual Angelcare AC017 (page 8 of 28) (English, French, Spanish)

681980

Zoom out

Zoom in

1/28

ALARM WILL NOT SOUND

• Avoid contact with the crib when the monitor is ON.

• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the crib.

• Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.

• You may need to decrease the sensitivity (refer to Step 4.3).

SENSOR PAD LIGHT INDICATOR FLASHING RED

• Make sure there is no bedding between the mattress and the Sensor Pad.

• e Sensor Pad must rest on a completely ﬂat and ﬁrm surface. If the crib has a spring or slat base, place a hard board between

the crib base and the Sensor Pad measuring at least 13’’ x 13’’ (33 x 33 cm) and 1/4’’ (6 mm) thick.

• Make sure Sensor Pad is positioned as described under the setup requirements. Sensitivity may need to be adjusted

(refer to Step 4.3).

LOSS OF CONNECTIVITY NURSERY UNIT BLUE LIGHT FLASHES AND EMITS A SOUND EVERY 20 SECONDS

• Bring the units closer together.

• Press and hold for 2 seconds the Nursery Unit Pairing button, the Nursery Unit will emit a sound and will ﬂash blue to conﬁrm

connectivity.

NO POWER

• Check or replace batteries.

• Make sure monitor is ON.

LIMITED WARRANTY

Angelcare

warrants to the original owner of this product that Angelcare

monitor is free from any material and workmanship defects for the term of

the warranty period (see warranty table below to determine the warranty

for your country). If this monitoring system fails to function properly when

used as directed under normal conditions and during the warranty period,

Angelcare

will either repair or replace the product, at our discretion, free

of charge. Please contact your local distributor to validate warranty and

warranty period.

e product must be accompanied by a proof of purchase, either a bill of

sale or other proof that the monitoring system is within the warranty period.

Angelcare

will bear the cost of repairing or replacing the product and

shipping it back to you.

is warranty does not apply to a product which has been

damaged as a result of improper maintenance, an accident,

improper voltage supply or any other form of misuse. e warranty

is also void if the owner repairs or modiﬁes the product in any

way. Angelcare

is not liable for any incidental or consequential

damages with regard to this product. e warranty also excludes

any liability other than what is stated above. No other warranty

is given.

is warranty does not cover products and accessories which are not

Angelcare-branded, or any problems that result from usage that is not

in accordance with product instructions, failure to follow the product

instructions, or problems caused by using accessories, parts

or components not supplied by Angelcare.

LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM

THE USE OF THIS PRODUCT.

IMPORTANT! is Angelcare

monitor is a personal care product. Please

do not return this product to the store. If you have questions or need help,

please call your distributor before returning this product.

WARRANTY TERM PER COUNTRY

North America 1 year

TECHNICAL SPECIFICATIONS

Range:

Open ﬁeld (Open area without obstructions): up to 8 meters.

Power Supply:

2 AAA alkaline batteries for Nursery Unit (not included)

1 CR3032 3V battery for wireless Sensor Pad (included)

Caution: To reduce the risk of electric shock, do not expose this product

to rain or moisture.

Danger of explosion if batteries are incorrectly replaced. e battery for

the Sensor Pad is a user replaceable Lithium (not Li-Ion) battery and is NOT

rechargeable. Only use the Angelcare

recommended replacement battery.

To obtain information on replacement batteries please contact Angelcare

customer service: www.angelcarebaby.com or contact your local

distributor. Instructions will be included with the replacement battery.

Keep all batteries away from children.

PROTECT THE ENVIRONMENT

e wheelie bin symbols mean that according to local laws and

regulations your product and/or its battery shall be disposed of

separately from household waste. When the product/battery reaches

its end of life take it to a collection point designated by local authorities.

e seperate disposal and recycling will help conserve natural resources

and protect human health and the environment. Refer to User’s Guide for

removal of batteries.

Batteries:

• DO NOT mix old and new batteries.

• DO NOT mix alkaline standard (carbon-zinc), or rechargeable

(NI-CD, NIMH, etc.) batteries.

• CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE.

Transmission:

Data transmission between the Nursery Unit and the sensor Pad is made on

2.402 to 2.480 GHz frequency for North America.

Maximum RF Power Transmitted: 4dBm (2.5mW)

RF Channel no. : 79

03m11_Manuel_AC017_NA_12643.indd 8 2018-01-29 2:02 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC017 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Angelcare AC017 Manual

Product: