681980

Angelcare AC017 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
STEP 1  SETTING UP THE NURSERY UNIT
NURSERY UNIT:
Power ON/OFF Light Indicator
Low Battery Light Indicator
Battery Door
(2 AAA)
Power
ON/OFF
Pause/Pairing
Button
Nursery Unit Stand
Movement Sensor
Pad Sensitivity
Switch
Sensor Pad
light indicator
1.1  INSERT THE BATTERIES
When using the Nursery Unit for the first time, you will need to insert 2 AAA alkaline batteries (not included).
1) Remove the battery door with screwdriver
and insert 2 AAA batteries.
1.2  SELECT A LOCATION FOR THE NURSERY UNIT
Nursery Unit can be installed using the tabletop stand.
Place the Nursery
unit at least 3 feet
(1 meter) from
the crib
STEP 2  POSITIONING THE MOVEMENT SENSOR PAD
2.1  POWERING THE MOVEMENT SENSOR PAD
When using the Sensor Pad for the first time, you will need to insert the provided CR3032 battery.
1) Remove the battery cover using a coin. Turn in
the direction of the arrow.
2) Place the included battery (CR3032) in the
compartment. Note: e + symbol should be
facing up.
3) Replace the battery cover (the two dots will line
up). e Sensor Pad is now ON.
2.2  INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
IMPORTANT
If your crib does not have a solid, stable surface for the Sensor Pad, you will need to place a
support under it, to ensure correct operation of the system.
is hardboard support should be at least 1/4’’ (6 mm) thick and should have minimum dimensions
of 13’’ x 13’’ (33 x 33 cm). is support board must be larger than the Sensor Pad surface area.
e Sensor Pad functions with any size and type of mattress except memory-foam mattresses,
hollow frame mattresses and water beds. e hardboard maintains a constant pressure on the
Sensor Pad, enabling it to detect the baby’s movements even when the baby is at the edges of the
crib.
Hardboard
Sensor Pad
2
1) Remove the mattress from the crib.
2) Place the Sensor Pad - Angelcare
®
logo
side
up - in the center of the mattress. It should be
centered on the hardboard if your crib requires
a hardboard support.
3) Replace the mattress.
WARNING -
• e Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Discontinue used of the Sensor Pad when child is older than 24 months. Remove Sensor Pad from crib
and store for future use.
• BEFORE FIRST TIME USE: To test that the unit is ready for use, refer to instruction manual on how to test
that the installation has been done correctly.
STEP 3  TURNING ON YOUR MONITOR
Press and hold the Nursery Unit
ON/OFF button for
2 seconds until the Nursery Unit
Indicator flashes slowly in green.
e Nursery Unit will emit a sound and flash blue to
confirm pairing with the Sensor Pad
NOTE:
If the green light does not appear but the red
light is flashing; or if there are false alarms,
adjust the sensitivity level (Step 4.3).
5
E
N
03m11_Manuel_AC017_NA_12643.indd 5 2018-01-29 2:02 PM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC017 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info