704202
12
Zoom out
Zoom in
Previous page
1/36
Next page
English 11
Using the Monitor
Installing / Changing the Batteries
1. Confirm that the AC adapter is removed
from outlet.
2. Remove the screws that secure the
battery cover on the rear side of the main
body.
3. Remove the battery cover.
4. Connect the battery’s connector while
pushing the hook at the left side to the
connector in the battery compartment.
5. Close the battery cover.
6. Secure the battery cover by using the
screws.
CAUTION
When
(LOW BATTERY mark)
blinks on the display, recharge the battery.
Replace the battery two seconds or more after the device turns off.
If (LOW BATTERY mark) appears even after the
battery
is replaced, make a
blood pressure measurement. The device may then recognize the new
battery
.
(LOW BATTERY mark)
does not appear when the battery is drained.
The battery life varies with the ambient room temperature and may be
shorter at low room temperatures.
Use the specified battery only.
Remove the battery if the device is not to be used for a long time.
The battery may leak and cause a malfunction.
Exchange the battery with new one when an operation time using the
battery with this device is extremely short even after recharging.
We recommend exchanging the battery once every two years.
Be sure the time was reset when the battery was replaced.
Connecting the Air Hose
Insert the air connector plug into
the air socket firmly.
A
ir connector plug
Step 3
Step 2
A
ir socket
Step 4
Battery cover
Battery
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UM-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UM-211 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info