704179
15
Zoom out
Zoom in
Previous page
1/17
Next page
13
Troubleshooting
Problem Possible Reason Recommended Action
Batteries are drained. Replace both batteries with new ones.
Nothing appears in the
display, even when the
power is turned on.
Battery terminals are not in the correct
position.
Reinstall the batteries with negative and
positive terminals matching those indicated on
the battery compartment.
The cuff does not
inflate.
Battery voltage is too low.
(LOW BATTERY mark)
blinks. [ If the
batteries are drained completely, the mark
does not appear.]
Replace both batteries with new ones.
The cuff is not fastened properly. Fasten the cuff correctly.
You moved your arm or body during the
measurement.
Make sure you remain very still and quiet
during the measurement.
The cuff position is not correct.
Sit comfortably and still.
Raise your hand so that the cuff is at the same
level as your heart.
The device does not
measure.
Readings are too high
or too low.
If you have a very weak or irregular heat beat,
the device may have difficulty in determining
your blood pressure.
The value is different from that measured at a
clinic or doctor’s office.
See “Why measure blood pressure at home?”.
Other
Remove the batteries. Place them back
properly and try the measurement again.
Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair
this product yourself, as any attempt to do so will make your warranty invalid.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD UB-510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD UB-510 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info