Manual Amplicomms V130 Watch and Care (page 46 of 58) (English, German)

567775

Zoom out

Zoom in

1/58

Helpline UK 0844 800 6503

(See page 44 for costs and hours of operation)

External shaker option

1. The external shaker (Amplicomms PTV100) is an optional device

which is supplied separately to this system. The external shaker can

be plugged into the designated output at the side of the display on

the parent unit, to enable use as a powerful under-pillow vibrating

alert. The external shaker operates when the parent unit built-in

vibrator does. Therefore the vibrator option must be enabled within

the menu.

2. The parent unit display and sound, is activated when the system

detects the baby crying, the sensitivity level of which can be adjus-

ted in the VOX setting. A single activation of the external

vibrator/shaker also occurs. The parent unit stays active for 60

seconds following the trigger, during which time any further trigge-

ring of the vibrator/shaker will only occur when either of the two

sound level LEDs are activated by the incoming sound. Therefore the

incoming sound level has to be reasonably loud (at least

75dB@0.5mtrs) in order to trigger the 2nd highest LED. This is set to

avoid false triggering the system by one-off low level sounds such

as baby sighing for example.

OPERATING THE RECEIVER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms V130 Watch and Care in the language / languages: English, German as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amplicomms V130 Watch and Care Manual

Product: