Manual Amplicomms V130 Watch and Care (page 42 of 58) (English, German)

567775

Zoom out

Zoom in

1/58

sounds in the room being monitored are so loud that the red Sound

Level LEDs are activated.

Adjusting the VOX sensitivity

(VOX: Voice Operated Transmission = Sound detection)

The VOX function (sound detection) causes the system to start transmitting

automatically from the transmitter to the receiver immediately a voice or

sound is detected.

Press the button seven times.

This icon appears in the display.

Use these buttons to set VOX to OFF or adjust the sensitivity to one

of 5 levels (5 = highest sensitivity). When one of the five levels has

been set, the VOX icon lights up in the display.

Video/Audio switching

You can manually switch off the display to save battery power. The sound

from the baby’s room are to be heard permanently and the display will

automatically switch on again if triggered by the vox detector.

Press this button briefly.

For switching the display on again press this button again briefly.

• If the receiver is placed on the charger the display will switch off

after approx. one minute of inactivity, but will switch back on if trig-

gered by the vox detector in the transmitter or by pressing any but-

ton on the receiver.

However if VOX is set to OFF, the display will remain on all the time.

OPERATING THE RECEIVER

Helpline UK 0844 800 6503

(See page 44 for costs and hours of operation)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms V130 Watch and Care in the language / languages: English, German as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amplicomms V130 Watch and Care Manual

Product: