567778
34
Zoom out
Zoom in
Previous page
1/54
Next page
Operation with rechargeable batteries
1. Open the battery compartment on the rear side of the receiver.
2. Insert the battery pack, and connect it with the socket. The connector can
only be fitted one way.
3. Close the battery compartment again.
Mounting/dismounting the belt clip
Prize the latch (see figure) with a suitable tool (such as
a small screwdriver) a little bit away from the chassis
and move the belt clip down simultaneously. To attach
the belt clip slide it into the guide towards the top until
it snaps in.
Optimization of range
Baby unit and parent unit come with
fold-out antennas. If necessary, opti-
mum range can be achieved if both
the Baby unit and Parent unit anten-
nas are extended vertically.
The receiver is powered by a a Lithium-ion battery pack of 3.7 V,
1500 mAh. The rechargeable battery pack can be recharged directly in
the receiver when it is inserted in the charging station. The Power LED
lights up red when the receiver is being charged. In the case of a low
battery charge, the Power LED flashes slowly. The battery pack must
then be recharged.
30
GERÄTE IN BETRIEB NEHMEN
Helpline UK 0844 800 6503
(See page 42 for costs and hours of operation)
PUTTING THE UNITS INTO OPERATION
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amplicomms V120 Watch and Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms V120 Watch and Care in the language / languages: English, German as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info