567780
7
Zoom out
Zoom in
Previous page
1/15
Next page
Preparing the Equipment
22
4. Connect the equipment as illustrated in the diagram.
Only use the telephone connection line supplied
because the equipment may not function if another
telephone connection line is used.
Mains power outlet
Vibration pad
Telephone line socket
In order to connect the alarm clock to a telephone
connection for use as a signal amplifier, you may need
an appropriate adapter. You can obtain one at a
specialist shop.
Only use the power adapter plug supplied labelled with
output data 12 V
DC
, 670 mA.
Basic settings
In order to be able to use the TCL 190 alarm clock, you must first
carry out the following settings.
1. Set the time. Turn the rotary knob (15) until the clock shows
the correct time.
2. Set the time at which the alarm should go off. Turn the rotary
knob (14) until the red hand points to the time at which the
alarm should be triggered.
3. Use the sliding switch (7) to select the type of alarm (mode).
There are three settings available, from left to right vibration
only", acoustic signal only" or acoustic signal + vibration".
4. Turn the rotary knob (4) to set the required volume. Firstly,
set the volume to quiet" (turn anticlockwise) and increase
the volume slowly.
Exposure to the alarm at full volume for a long period could
cause ear damage.
5. Turn the rotary knob (5) to set the required acoustic signal.
6. Turn the rotary knob (3) to set the required pitch for the
acoustic signal.
Use the rotary knobs for volume and pitch to select
settings whereby the alarm can serve its purpose with the
volume setting as low as possible. Depending on your
hearing, it is possible that you can detect higher or lower
pitch tones even at low volumes.
7. In order to activate the alarm to trigger at the set time, turn
the rotary knob (3) clockwise to On".
0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amplicomms TCL 190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms TCL 190 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amplicomms TCL 190

Amplicomms TCL 190 User Manual - German - 15 pages

Amplicomms TCL 190 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info