Manual Amplicomms PowerTel 50 Alarm Plus (page 37 of 58) (English)

567322

Zoom out

Zoom in

1/58

Helpline UK 0844 800 6503

(See page 43 for costs and hours of operation)

Starting/Ending the automatic emergency call

The phone behaves as follows on starting the automatic emergency call:

1. The emergency phone loudspeaker is switched on. An acoustic “emergency

call active” signal is sounded for 15 sec.

2. You can then hear the dialling tone and the phone numbers assigned to the

M1, M2 and M3 buttons are automatically dialled, in succession, at intervals

of approx. 60 seconds. The outgoing alert message is played in a continu-

ous cycle.

3. The person answering the call immediately hears this alert message. The

person taking the call stops the outgoing alert message by pressing ”0”.

You can then converse for 3 minutes. Handsfree mode remains active on the

phone making the emergency call during this time.

4. When the 3 minutes have elapsed, the call is disconnected. An attempt

begins again to dial the phone numbers assigned to buttons M1, M2 and

M3 as described above.

5. If the call is disconnected or the receiver is placed on-hook before the 3

minutes have elapsed, an attempt is made to dial the emergency numbers.

The emergency procedure won’t be stop unless 3 numbers have been dia-

led out or press the button on the emergency call unit again or press M1,

M2 or M3 for 5 seconds.

Note: To end an emergency call, press the button on the emergency call unit

again or press M1, M2 or M3 for 5 seconds.

PHONE SETTINGS

Why, when the Emergency Button is pressed does only the M1 stored Number ring, not M2 or M3? Submitted on 15-8-2020 at 17:26
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms PowerTel 50 Alarm Plus in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amplicomms PowerTel 50 Alarm Plus

Amplicomms PowerTel 50 Alarm Plus User Manual - German - 58 pages

Amplicomms PowerTel 50 Alarm Plus User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amplicomms PowerTel 50 Alarm Plus Manual

Product: