Manual Amplicomms BigTel 48 (page 17 of 74) (English, German, Dutch, French, Italian, Spanish)

747131

Zoom out

Zoom in

1/74

INSTALLATION

3 Installation

3.1 Connecting the receiver

After unpacking your telephone, you must first connect the telephone recei-

ver to the base unit. The spiral cable needed for this has two identical con-

nections so that there can be no confusion. First take one end of the spiral

cable and plug it into the socket at the bottom of the receiver. Now plug the

other end into the socket on the left-hand side of the base unit.

3.2 Insert battery

Before connecting your new telephone to the telephone network, the sup-

plied battery should be installed. Please always use type AAA 1.5V alkaline

batteries. The batteries are required for the display and other features of the

telephone. Before installing or changing the batteries make sure that the

telephone is not connected to the telephone network. The battery compart-

ment is to be found on the underside of your telephone.

1. Open the battery compartment with a small screwdriver or a pointed

object.

2. Insert the battery. Ensure that the polarity is correct. Push the "-" pole

onto the small spring and then press the "+" pole downwards.

3. Close the battery compartment.

The battery must be changed when the display is no longer visible.

3.3 Connecting the telephone

Connect the telephone cable provided to the telephone jack and the tele-

phone socket on the rear of the telephone. The telephone works using the

TTD system (Touch-Tone Dialling).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms BigTel 48 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amplicomms BigTel 48 Manual

Product: