567315
4
Zoom out
Zoom in
Previous page
1/76
Next page
Helpline UK 0844 800 6503
(See page 21 for costs and hours of operation)
2
SICHERHEITSHINWEISE
Safety Information
Please read this operating instruction manual thoroughly.
Intended use
The telephone is suitable for telephoning within a public tele-
phone network system. Any other use is considered unintended
use. Unauthorised modification or reconstruction is not permit-
ted. Under no circumstances open the device or complete any
repair work yourself.
Installation location
Prevent excessive exposure to smoke, dust, vibration, chemi-
cals, moisture, heat and direct sunlight.
Do not use the handset in potentially explosive areas.
Power adapter plug
a
Attention: Only use the power adapter plug supplied
because other power supplies could damage the telephone.
The socket outlet should be installed near the equipment and you
should ensure access to the power adapter plug is not obstructed
by furniture or such.
Rechargeable batteries
a
Attention: Never throw batteries into a fire.
Only use batteries of the same type. Pay attention to the correct
polarity. Incorrect polarity of the batteries represents a risk of
explosion during charging.
Power failure
The telephone cannot be used to make calls in the event of a
power failure. Always keep a cord connected telephone which
operates without an external power supply available in case of
emergency situations.
Medical equipment
a
Attention: Never use the telephone in the vicinity of medical
equipment. Effects on such equipment cannot be fully ruled out.
It is recommended that if you have a pacemaker fitted you check
with a medical expert or your health adviser before using this
product.
DECT
1
telephones can cause an unpleasant humming sound in
hearing aids.
Earpiece Volume
Your telephone has an amplifying key, which amplifies the ear-
piece volume significant if it is pressed. In the display “Boost
On“ is flashing. To switch off the activated amplification press
the key again. “Boost On“ disappears. The activated amplificati-
on will be switched off automatically whenever the present call
is finished.
In the menu (Handset / Boost On -> On) you can switch on the
amplification permanently. “BOOST ON” will replace the hand-
set name on stand-by screen. By pressing the amplifying key
you can switch off the amplification for the present call. For the
next call it will be on again.
1
DECT: Digital Enhanced Cordless Telecommunication =
Standard for cordless telephones
SAFETY INFORMATION
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amplicomms BigTel 202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms BigTel 202 in the language / languages: English, Dutch, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amplicomms BigTel 202

Amplicomms BigTel 202 User Manual - German - 54 pages

Amplicomms BigTel 202 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info