792133
14
Zoom out
Zoom in
Previous page
1/23
Next page
14
8.5. Set Base
1. In standby mode, press the menu key .
2. Select BS Settings and press .
Dial mode: Select Tone or Pulse. The normal dialing procedure for analog
connections is “Tone” (tone dialing). When operating with certain older
telephone systems the dialing procedure should be changed to “Pulse
(decadic pulse dialing).
Delete HS: Enter the PIN of the base station and select the handset you
wanttodelete.Conrmthesecurityquestionwith .
Flash duration: Choose 100 ms, 270 ms or 600 ms. In order to use
thenetworkperformancecharacteristics,acertainashsignal witha
certain length is required.
Change PIN: Select Change PIN?, and enter Old PIN, press , and
then enter New PIN, press toconrm.
Eco Mode:SelectOnorOandpress .
9. REGISTRATION
Your handset and base station is pre-registered.
Up to 4 handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base station ashes
even when the handset is near the base station).
1. Press and hold onthebasestationforaboutveseconds,thebase
station is entered into registration mode.
2. Press and / to select Registration.
3. Press and select the destination base you would like to register to.
4. Press and you are requested to enter the 4-digit system PIN. Enter
the 4-digit system PIN (default PIN is 0000).
5. Press toconrm.
Ifthehandset registrationis successful,youwill hearaconrmation tone
and the willstopashing.
If the handset registration is unsuccessful, the willstillash.
10. CALL BLOCK
This telephone is built-in with Smart Call Block feature*.
This feature will help you avoid nuisance calls by only allowing some numbers
to make your phone ring.
Default setting of Smart Call Block in this telephone is OFF but you can
enable it via your phone settings, as explained in the following paragraphs.
*This feature requires a subscription of Caller Line Identication service from your
telephone service provider.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amplicomms BigTel 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms BigTel 1500 in the language / languages: English as an attachment in your email.

The manual is 1.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amplicomms BigTel 1500

Amplicomms BigTel 1500 User Manual - German, Dutch, French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info