541772
4
Zoom out
Zoom in
Previous page
1/20
Next page
SVT-4 PRO Bass Guitar Amplifier
4
Introduction
Congratulations!
You are now the proud owner of an Ampeg SVT-4 PRO bass
guitar amplifier. This versatile and powerful bass amplifier delivers up to 1600 watts of
unsurpassed quality, offering the classic vibrance of tubes, as well as contemporary features.
The SVT-4 PRO amplifier is an ideal companion to the Classic Series, Pro Series, or
PF cabinets, available separately.
Like all Ampeg products, your SVT-4 PRO amplifier is designed by musicians and built
using only the best of components. Each amplifier is tested to confirm that it meets our
specifications, and we believe that this amplifier is the absolute best that it can be. In order to
get the most out of your new amplifier, please read this manual before you begin playing.
Best of luck in all of your musical endeavors!
Sincerely,
The dedicated team at Ampeg
Features
• DUAL SEPARATE POWER AMPLIFIERS: Operate in true stereo or mono bridged mode
for even greater output power [pages 5–6, 12].
• BI-AMP CAPABLE: Adjustable crossover frequency control and low-to-high frequency
balance control allow you to fine-tune the bi-amp abilities of the amplifier [pages 6–7, 10].
• 5-POSITION MIDRANGE SELECTOR: Take your pick from the five center frequency
points available to get just the right midrange voicing [page 9].
• COMPRESSION CONTROL: Allows you to control the dynamics of the tonal response
characteristics from the power amp, from punch to compressed [page 8].
• 9–BAND GRAPHIC EQ: Use as a “second channel” for bass solos, or to shape the
sound to your own exacting standards. An independent level control allows you to adjust
the Graphic EQ volume [page 10].
• TUNER OUT JACKS: Two jacks – one on the front panel, one on the rear panel – allows
connection to an electronic tuner and provides an “always live” monitor feed, even when
the output is muted [pages 8, 13].
• SPEAKON JACKS: For more reliable connections at higher outputs and for mono
bridged connections (in addition to 1/4" speaker out jacks) [page 11].
• TRANSFORMER BALANCED LINE OUTPUTS: Independent level control. Two trans-
former balanced XLR and two balanced/unbalanced 1/4" output jacks – switchable stereo
or mono (one “wet”, one “dry” signal), pre– or post–EQ [page 12].
• STEREO EFFECTS LOOP: Connect effects here for increased intensity and quieter
operation [page 13].
• POWER AMP IN AND PREAMP OUT: Two separate loops, one for each channel:
a separate preamp may be connected to the Power Amp In jack and the Preamp Out
jack may be connected to a slave amp [page 12].
• FOOTSWITCH CONTROL: Use a footswitch to bypass/activate the Effects Loop and to
activate the Graphic EQ and the Mute feature [page 12].
• CIRCUIT BREAKER PROTECTION: A heavy duty resettable circuit breaker provides
protection against fault conditions [page 11].
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ampeg SVT-4 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ampeg SVT-4 Pro in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info