541759
17
Zoom out
Zoom in
Previous page
1/20
Next page
PF-350 / PF-500 / PF-800 Bass Guitar Amplifier
17
Service Information
I
f you are having a problem with your PF-500 / PF-800, you can go to our website
(www.ampeg.com)
and click on Support for service information, or call Technical Support
at 1-800-898-3211
Monday-Friday during
normal business hours, Pacific Time
, to receive
assistance. If you are outside of the U.S., contact your local distributor for technical support
and service.
PF-500 / PF-800 TECHNICAL SPECIFICATIONS
OutputPowerRating  300wattsrms@8ohms,3%THD[PF-500]
500wattsrms@4ohms,3%THD[PF-500]
400wattsrms@8ohms,3%THD[PF-800]
800wattsrms@4ohms,3%THD[PF-800]
SignaltoNoiseRatio 72dB(20Hz–20kHz,unweighted)[PF-500]
74dB(20Hz–20kHz,unweighted)[PF-800]
MaximumGain 69dB,tonecontrolscentered[PF-500]
71dB,tonecontrolscentered[PF-800]
Tone Controls Bass: +12/–12 dB @ 40 Hz
Midrange: +10/–20 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +15/–20 dB @ 4 kHz
PowerRequirements ~100–120VAC,50–60Hz,125W[PF-500]
~200–240VAC,50–60Hz,125W[PF-500]
~100–120VAC,50–60Hz,200W[PF-800]
~200–240VAC,50–60Hz,200W[PF-800]
Size (H x W x D) 3.1 in/80 mm x 14.0 in/355 mm
x10.8in/272mm[PF-500]
3.1 in/80 mm x 15.0 in/381 mm
x10.8in/272mm[PF-800]
Weight 11.0lb/5.0kg(approximately)[PF-500]
11.8lb/5.4kg(approximately)[PF-800]
The PF-500/PF-800 is covered with sheet metal, so be sure to clean with a dry lint-free cloth.
Never
spray cleaning agents on the PF-500/PF-800. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
17


Need help? Post your question in this forum.

Forumrules
1

Forum

ampeg-pf800

Reset search

  • I plug my audio devise into the audio in Port on my ampeg of 800 and no sound comes? Submitted on 12-10-2019 at 21:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ampeg PF800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ampeg PF800 in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info