792127
25
Zoom out
Zoom in
Previous page
1/32
Next page
11.8.3 Ftp Upgrade
When connected to the Internet, receiver can make software
update from file from FTP server.
Note: This function depends on connection with external server.
In case of no software on server, this function will not work.
11.8.4 Upgrade by RS232:
1. We offer the functions for user to connecting receiver
(Master) to the other receiver (Slave) via serial interface.
Connect master receiver to slave receiver via serial inter-
face. Enter ”Software Upgrade” menu in master receiv-
er and press[left/right]keys to switch upgrade mode All
SW+bootloader /All SW+Channel list/Software(no channel
list)/Channel list.
2. Moving highlight to ”Start” on master reeciver and press[OK]
key to start upgrade.
3. Turn on slave receiver and it needn’t operate any setting.
4. Press [Exit]key to draw back.
11.8.5 Backup to USB
In this menu ,you can dump the software to the USB equipment
1. In ”Backup file”,you can press [OK] key to edit the file name.;
Press ”Left/Right” button select USB A or USB B;
2. In ”Backup to USB”, you can press [OK] to start backup
software.
a) Upgrade By Satellite:
This function can upgrade the software through signal lines from
the satellite
1. Select the satellite and TP or input the TP value and down-
load PID, these parameters you can get from your provider.
2. Then move the highlight to the start button and press [OK]
button to start upgrade.
b) Upgrade By Terrestrial:
This function can upgrade the software through signal lines from
the Terrestrial
1. Select or input the Frequency, Bandwidth and download PID,
these parameters you can get from your provider.
2. Then move the highlight to the start button and press [OK]
button to start upgrade.
c) Upgrade by Cable
This function can upgrade the software through signal lines from
the cable.
1. Input the frequency, symbol rate value and download PID,
and select scan mode.
2. Then move the highlight to the start button and
3. press [OK] key to begin to upgrade.
11.9 DEFAULT SETTING
25
USER’S MANUAL
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko T70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko T70 in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info