792123
24
Zoom out
Zoom in
Previous page
1/32
Next page
XI. Press [MENU] key to exit the current menu.
11.6 PARENTAL CONTROL
1. You can set a password for anyone who wishes to operate in
the ”Installation” menu. And you can also set the password
for the lock channels. (How to set the lock channel please
refer to LOCK) Here will show you how to setting and how to
revising the password.
2. In ”Parental Lock” function, press [OK] key, there will pop an
dialogue for you to input the password. When you input the
correct password, you will see a screen like below:
3. Menu Lock determining that when user wish to enter
”Installation” menu, whether have to input Password or not. If
the setting of ”Menu Lock” is ”On” which means user have to
key in password, set ”Off” means unlock.
4. Channel Lock determining that when user wish to play the
lock channels, whether have to input the password or not.
If the setting is ”On”, play the channels with lock mark will
show up a dialogue on the screen and ask for the password.
If the setting of ”Channel Lock ”is ”Off”, the Lock function will
invalid.
5.
New Password is used for revising password; you can input
the new password in this item by using number keys directly.
After you filled in 4 digital numbers, the highlight will auto skip
to Confirm Password and ask you to input the new password
again. If the password is correct, the screen will show up a mes-
sage of ”Saving Data, Please Wait…”. After finish saving and
draw back to ”System Setup” menu, the revising is complete.
6.
Press [MENU] key to draw back from the ”Parental Lock” menu.
11.7 MISCELLANEOUS SETTINGS
When you enter to ”Miscellaneous Settings” menu, you will see
a screen like below:
1. Subtitle Auto: You can press [Left/Right] key to select ”On”
or ”Off”. If the current channel has subtitle information, it will
be showed up automatically while this function is ”ON”, if this
function is ”OFF”, you need turn on the subtitle manually by
press [SUBTITLE] key.
2. Auto Power Down: You can press[Left/Right] key to select the
time or ”Off”, if you select time, duration this time if no any
operation on receiver, it will go to standby mode.
3. Standby mods: if set to ”Real”, Press power key receiver will
be in real standby status, the consumption will less than 0.5
Watt. if it’s set to ”Fake” ,Press power key, receiver will be in
fake standby status.
4. OSD Timeout: When you switch channels in full screen, there
will show up some information about current channel on the
lower of the screen. And regarding to the duration of these
information show up on the screen, you can press [OK] and
[up/ down] key to set the time. The range of the duration is ”1
second ~ 10seconds”.
5. OSD Position: control display position of the info bar in full
screen mode. You can choose ”bottom” or ”top”.
11.8 SOFTWARE UPGRADE
11.8.1 Upgrade By USB
In this menu you can upgrade the software from USB conveni-
ently, Press ”Left/Right” button select USB A or USB B; press
OK ‘ button to enter.
In this menu you can select the Upgrade Mode among
Software(No channel list), Channel list, All SW+bootloader
and All SW+Channel list, and you can select the appropri-
ate upgrade file on ”Upgrade File” item. After you select the
”Upgrade Mode” and ”Upgrade File”, press OK button on
”Start” item, the receiver can upgrade automaticlly
Note: You must put the upgrade file on the /ROOT DIRECTORY
of the USB storage.
11.8.2 Http Upgrade
When connected to the Internet, receiver can manually or auto-
matically make software update from file from server.
Note: This function depends on connection with external server.
In case of no software on server, this function will not work.
24
USER’S MANUAL
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko MINI COMBO EXTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko MINI COMBO EXTRA in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info