792125

Amiko IMPULSE T2C Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
then the IP Address, Subnet Mask, Gateway and DNS
options become enabled. You have to set these options
according to your IP address.
4. WiFi Manager
Insert WiFi equipment first, then search available Enter net
signal, input the password to connect with network.
5. 3G Network
a) When you inset the 3G dongle, the screen will display a mes-
sage like ”3G Device plug in ”after 14 seconds and will auto
connect 3G Network. you will see picture like the below.
b) In this menu,you can press [OK] key select 3G Dial setting,
Press [OK] key to select connect to network or disconnect
the network
11.4 TIME SETTING
When you enter to ”Local Time Setting” menu, you will see the
screen like below:
• GMT Usage: This item is use for open the usage of GMT. You
can press [Left/Right]keys to switch ”On/Off”.
• The ”GMT Offset” item is valid only when the setting of ”GMT
Usage” is ”Yes”. You can press[Left/Right]keys to switch ”GMT
Offset” value, and the range is ”-12:00 ~ +12:00”, increase
each half hour progressively.
• You can press [Left/Right] to control Summer time on or off.
• ”Date” and ”Time” items are valid only when the setting of
”GMT Usage” is ”No”. You can press [Left/Right] keys to mov-
ing highlight and use number keys to input directly.
• Press [MENU]key to draw back from ”Local Time Setting”
Menu.
11.5 TIMER
Press [OK] key to open timer menu.
• Current time information will display on the first column; if the
current time is incorrect, please modify the time information in
”Time” item.
• Timer Number: You can press [Left/Right]keys to set Timer
number, and there are 8 timers in total.
• Timer Mode: There are several modes for Timer to setting,
include Off, Once, Daily, Weekly and Monthly .
• Timer Service: There are two options for ”Timer Service”,
include ”TV Channel” and ”Radio Channel” (timer setting for
channel change and Wakeup/Sleep) and ”Record Radio” and
”Record TV” (Timer setting for Record the TV or Radio pro-
gram to USB Hard Disk) and Message (reminding message).
• When you select ”Channel” (timer setting for channel change
and Wakeup/Sleep) option in ”Timer Service”, the screen will
display like below:
I. Channel: press [OK] key to enter channel list and select chan-
nel that you want to setting.
II. Date: use number keys to input your wakeup date.
III. On Time: use number keys to input your wakeup time. Once
the time’s up, no matter what the system is in standby mode
or in playing mode, the system will automatically switch to
the channel you want and start to play.
IV.
Duration: After you set a time for ”Duration” item, once the
time’s up, the system will automatically switch to standby mode.
If you want not work this function, set the duration is 00:00.
• When you select ”Message” (reminding message) option in
”Timer Service”, the screen will display like below:
V. Wakeup Message: press [Left/Right] key to select reminding
message as Birthday, Anniversary and General.
VI. Date, you can use number key to input your wakeup date.
VII. On Time: use number keys to input your wakeup time.
Once the time’s up, no matter what the system is in standby
mode or in playing mode, the system will automatically pop
a reminding message.
VIII. The message will always display on the screen, you can
press [Exit] key to close it.
IX. Standby After Finish: You can press [Left/Right] to control
the system is in standby mode or in playing mode after the
record stopped.
X. Extend Record Time : Press [left/right] button or input the
number using numeric keys to set the Extend Record Time. It
is used to add time at beginning and end of the record time.
23
USER’S MANUAL
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko IMPULSE T2C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko IMPULSE T2C in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info