792125
20
Zoom out
Zoom in
Previous page
1/32
Next page
a) Disable: without DiSEqC.
b) 1/2, 2/2: two ports DiSEqC
c) 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
d) 1/8, 2/8… 8/8: 8 ports DiSEqC
e) 1/16, 2/16….16/16: 16 ports DiSEqC
Positioner
Positioner In ”Positioner” item, you can press [Left/Right]key
to switch ”Off / DiSEqC 1.2 / USALS” functions.
22K
You can use [Volume Up/ Volume Down] key to switch ”ON /
Off”. When this item is switched to ”ON”, receiver will receive TV
and radio input signal from 22K port. If the item is switched to
”Off”, the receiver will receive all signal from 0K port.
! Notice: When you choose LNB type ”Universal”, you can not
modify 22K.
Polarity
In ”Polarity” item, [Left/Right]key to switch ”Auto / H / V” func-
tions.
LNB Power
In ”LNB POWER” item, you can press [Left/Right] key to switch:
” On/Off” functions.
TP Edit
When you enter to ”TP Edit” menu, there will display the screen
like below:
1. In ”Satellite” item, press[Left/Right]key to switch satellite that
you want to scan or press[OK]key to enter satellite list for
selection.
2. In ”TP Index” item, you not only can use [Left/Right]key to
select transponder but also can use [Add] and [Delete] func-
tions.
When you press[Green] key, it will display ”New TP” in ”TP
Index” item; You should set the parameters of ”TP Frequency”
and ”Symbol Rate” for this new transponder. The param-
eters of ”TP Frequency” and ”Symbol Rate” can set by num-
ber keys. The available range are ”3000~13450 MHz” and
”1000~45000Ks/s”.
When you press[Yellow] key, there will show up a warning
message for reminding whether you will delete the current
transponder or not. If you select ”Yes”, the current transponder
will be deleted, and the total account of transponder will
reduce 1 correspondingly.
When you press [Blue] key, there will show up a warning mes-
sage for reminding whether you will delete all transponders or
not. If you select ”OK”, all transponders will be deleted.
3.
For the existed transponder, you also can use number keys to
modify the parameters of ”TP Frequency” and ”Symbol Rate”.
4. When you complete your modification, Press [Red] key, it will
show up a dialog to ask you scan mode, program type, scan
type and NIT Search on/off. After you set up, press [OK] key
to start scanning.
5. In the ”TP Scan” item, press [Exit] key to exit the scanning
and save the current parameters.
Single Scan
1. Press [Red] key, it will show up a dialog to ask you scan
mode (means you want to scan all channels or only scan
free channels), program type (means you want to scan all
channels or only scan TV/Radio channels), scan type (means
preset scan, that is searching the existed TP. Automatic
Scan means blind scan. It is no need existed TP info) and
NIT Search on/off. After you set up, press [OK] key to start
scanning.
2. Press [White] key into the blind scanning immediately.
TP Scan
Press [Green] key to scan current TP’s programs.
Auto DiSEqC
Press [Blue] key to run Auto DiSEqC function, it can find the
satellite connect to which port automatically.
Blind Scan
Press [White] key can directly into blind scan mode to scan the
current satellite.
10.2 FASTSCAN SATELLITE
In this menu, you can search the channels fast by select the
provider and press OK button on Start Search item.
10.3 AUTO INSTALLATION
”Auto Installation” is a very new and convenient function. It will
automatically detect all dishes connecting to this machine and
scan the available services belonging to the satellite matched
according to satellites and transponders data in current data-
base. You don’t have to input any parameter of your antenna
settings. Just press ” OK ” button to enter this ”Auto Installation”
menu then it starts scanning and shows you the result at the
end of scanning.
10.4 SATELLITE GUIDE
When you enter to ”Satellite Guide” menu, you will see the
screen like below:
20
USER’S MANUAL
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko IMPULSE T2C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko IMPULSE T2C in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info