792120
9
Zoom out
Zoom in
Previous page
1/32
Next page
6. REAR PANEL
9
USER’S MANUAL
AMIKO HD8140C SE
AMIKO HD8142
AMIKO HD8155
RF IN: This port is to connect the coaxial cable from Cable Antenna.
S/PDIF: Digital Audio interface, connect to AV amplifier S/PDIF input terminal.
USB: USB 2.0 Host, connect to USB hard disk, or flash disk,and wifi dongles.
TV: This is used to connect your TV through SCART cable.
DV OUT: Audio and Video output socket for TV set with DV OUT Input Jack only.
RS 232 SERIAL PORT: This is used to connect your receiver to a computer through a serial cable.
Ethernet: Network port, you can get a new software updates from this port.
POWER ON/OFF SWITCH: To switch ON/OFF the receiver power supply.
RF IN: This port is to connect the coaxial cable from Cable Antenna.
Ethernet: Network port, you can enjoy the network application function via this port, or you can get new software updates or new
games.
HD OUT: Audio and Video output socket for TV set with HDMI Input Jack only.
RS 232 SERIALPORT: This is used to connect your receiver to a computer through a serial cable.
VIDEO: This RCA connector is used to connect any external video.
AUDIO R/L: These RCA connectors are used to connect any external audio amp or system.
S/PDIF: Digital Audio interface, connect to AV amplifier S/PDIF input terminal.
HDD: To connect internal HDD.
DC 12V: This is used to connect an external 12V adapter.
Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections have been made and checked.
LNB IN 13/18V 400mA MAX: This port is to connect the coaxial cable from LNB of your Dish.
S/PDIF: Digital Audio interface, connect to AV amplifier S/PDIF input terminal.
HDMI: Audio and Video output socket for TV set with HDMI Input Jack only.
RS 232: This is used to connect your receiver to a computer through a serial cable.
Ethernet: Network port, you can get a new software updates from this port.
TV: This SCART connector is used to connect TV using SCART cable.
POWER ON/OFF SWITCH: To switch ON/OFF the receiver power supply.
USB: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
AMIKO HD8265+
Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections have been made and checked.
LNB IN 13/18V 400mA MAX: This port is to connect the coaxial cable from LNB of your Dish.
RF IN: This port is to connect the coaxial cable from Terrestrial/Cable Antenna.
S/PDIF: Digital Audio interface, connect to AV amplifier S/PDIF input terminal.
USB B: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
AV OUT: This RCA connector is used to connect any external video and audio.
HD OUT: Audio and Video output socket for TV set with HDMI Input Jack only.
RS 232 SERIAL PORT: This is used to connect your receiver to a computer through a serial cable.
Ethernet: Network port, you can get a new software updates from this port.
IR IN: Connect an External IR-Sensor (Infrared).
DC 12V: This is used to connect an external 12V adapter.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko HD8155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko HD8155 in the language / languages: English as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info