794732
25
Zoom out
Zoom in
Previous page
1/32
Next page
If one of program monitor lights is on and start/Pause light is on and off,
Your machine’s door is open, shut the door.
If the programme won’t start
Check if the plug is connected.
Check your indoor fuses.
Be sure that the water inlet tap is turned on.
Be sure that you have closed the machine door.
Be sure that you switched off the machine by pressing the Power On / Off button.
Be sure that the water inlet filter and the machine filters are not clogged.
If the lamps “Wash/Dry” and “End” keep flashing
Water overflow alarm is active
Turn off your tap and contact an authorised service.
If the control lamps won’t go out after a wash operation
The Power On/Off button is released yet.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
ERROR CODE
Wash / Dry End Start/Pause
ERROR
DESCRIPTION
CONTROL
Inadequate water
supply
Make sure the water input tap is totally open and that
there is no water cut.
Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
Restart your machine, contact the service if the error
resumes.
Error of continuous
water input
Close the tap.
Contact the service.
The waste water in
the machine cannot
be discharged.
Water discharge hose is clogged.
The filters of your machine might be clogged.
Power off-on your machine and activate the program
cancellation command.
If the error continues, contact the service.
Intended water
temperature could not
be reached faulty
heater and heater
sensor
Contact the service.
Alarm is active against
water overflow
Power off your machine and close the tap.
Contact the service.
Faulty electronic card
Contact the service.
FAILURE CODES AND
WHAT TO DO IN CASE OF
FAILURE
23
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica ZZV614W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica ZZV614W in the language / languages: English as an attachment in your email.

The manual is 4.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info