794730
18
Zoom out
Zoom in
Previous page
1/36
Next page
17
When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergents.
: If you want to obtain better results while using combined detergents,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse
aid setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary
depending on the temperature and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use powder detergents in such
programs.
Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
Fill the salt and rinse aid compartments.
Adjust the water hardness setting to the highest position(6)andrunanempty-wash.
Adjust the water hardness level.
Make the suitable rinse aid setting.
Rinse aid is used to prevent the stay of white water drops, lime
stains, white film strip-shaped stains that may form on the
dishes, as well as to increase the drying performance. Contrary
to the popular beliefs, it is used not only for obtaining shinier
dishes but also for obtaining sufficiently dried dishes. For this
reason, care should be taken that there is adequate amount of
rinse aid in the rinse aid compartment and only polishing material
produced for use at dishwashers should be used.
If the rinse aid lamp on the control panel becomes on fill the rinse
aid compartment with rinse.
To put rinse aid, remove the rinse aid
compartment cap by turning it.1 Fill
the rinse aid compartment with rinse
aid until the rinse aid level indicator
becomes dark; 2 refit the cap and
close it by turning it in a way that the
nails will correspond to one another.
By checking the rinse aid level
indicator on the detergent dispenser,
you can understand whether or not
your machine needs rinse aid. A dark
indicator b means that there is rinse aid in the compartment,
while a light indicator a shows that you need to fill the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse
aid is the position 3. You need to increase the degree of the adjuster if water stains form on
your dishes after a wash, whereas you need to decrease the degree if a blue stain is left when
wiped by hand. 3
Use only those rinse aid materials which are allowed for use in the machine. As
rinse aid residues left as a result of overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it
with a rag
Recommended usage
Warning:
When you give up using combined detergents
Filling with rinse aid and making the setting
Warning:
ENGLISH
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica ZIV635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica ZIV635 in the language / languages: English as an attachment in your email.

The manual is 4.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info