2. Select the program suiting your dishes via the Program Selection button.
3. Close door.The program starts automatically.
Switching on the machine
Program follow-up
Changing a programme
If you would like to change programs while a washing program is continuing.
Note:If you decide not to start to machine after selecting the program , just press the on/off
button.Your machine will become ready for the new program selection when you press on/off
button again.You can select the new program by pressing the program selection buton.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
Switching the machine o
After the buzzer sound which indicates the end of the program when the washing program
comes to an end (end indicator light is on), you can leave the door of your machine ajar in order to
hasten the drying.
Note:
If the machine door opens during washing or the power is cut off, the machine will go on to the
program in case the door is shut or the power is back.
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
Note:
Once the power on/off key is
pressed, the end of program
indicator turns on.
When you select a program with the program
selection button, the light
of the selected program
turns
on and the end of program indicator turns
off.
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for “5 times” when the program is
completed.
Do not open the door before the
program ends.
Open the door and select a new
program by pressing the program
selection button.
After closing the door, the new
program started will resume
the course of the old program.
Open the door of your machine.
Light of the last selected
program will turn on.
Keep the program selection button pressed
for 3 seconds. (End of
program indicator
flashes and program light turns
off)
Discharge process starts after closing the
door of the machine.The machine
discharges the water in it for about 30
seconds.When the program is
cancelled,your machine gives a buzzer
sound for “5 times “ and the “end of
program indicator” turns on.
When end of the program indicator
turns on , switch your machine off
by using the Power On/Off button.
Pull the plug out of the outlet.
Turn of the water tap.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Amica ZIV413 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Amica ZIV413 in the language / languages: English as an attachment in your email.
The manual is 0.76 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.