Manual Amica UM1303 (page 21 of 24) (English)

795055

Zoom out

Zoom in

1/24

6. Remove the two screws, which attach the lower hinge to the appliance door (Fig. 5). Take special care

and hold the appliance door with the other hand.

7. Holding the door, swing the lower door hinge away from the door using the other hand, then detach

the door from the appliance body (Fig. 6).

8. Remove the two screws , which attach the upper hinge to the body and the two screws holding the

lower hinge to the appliance body (Fig. 7).

9. Screw the upper and lower hinge on the opposite side of the appliance body using suitable screws

(Fig. 8). Upper hinge should be mounted on the other side of the appliance as the lower hinge. The

lower hinge should be mounted on the other side of the appliance as the upper hinge.

With the hinges open, hold the door parallel to the appliance body and screw the hinges to the door

using suitable screws while taking proper care.

10. Make sure that the door is properly aligned with the appliance body (Fig. 9).

INSTALLATION OF THE APPLIANCE

Installation of the appliance should be performed by a qualied installer. The appliance should be placed in

furniture case (Fig. 10). Once the appliance is placed correctly, adjust the height of the appliance by turning

the 4 adjustable feet as appropriate. If necessary, adjacent Amica appliances should be braced with a bracket

xed by screws and tted in furniture (Fig. 11). There is a special strip at the top of the appliance. Attach it to

the underside of the cabinet with appropriate screws supplied with the assembly kit (Fig. 16). Decorative strip

must not block the vents located in the bottom casing unit, the strip must be cut to size (Fig. 17). The depth of

the bottom casing unit can be adjusted by moving it forwards or backwards. Once properly adjusted, tighten the

mounting screws (located in the openings on both sides of the casing unit) with a cross-head screwdriver. This

will permanently attach the casing unit (Fig. 18).

FITTING FURNITURE BOARD TO APPLIANCE DOOR

Place the mounting bracket on furniture board and position it accordingly (Fig. 12). The distance between the

furniture board and the underside of the worktop should be 5 mm (Fig. 13). Attach the mounting bracket using

suitable screws supplied in the installation kit. Pull out the mounting bracket cover and screw in the two special

screws (2) in the appliance doors(Fig. 14). Attach furniture board with the xed mounting bracket to the appliance

door. Secure the furniture board with suitable nuts (item 3, Figure 14). Make sure the furniture board assembly

is positioned correctly relative to the appliance (Fig. 15). Using the supplied screws, attach the furniture board

assembly to the bottom of the appliance door (Fig. 15). Replace the mounting bracket cover in its original location.

1. Unplug the appliance before reversing the door opening direction.

2. Remove food from the appliance.

3. Remove caps on the front of the refrigerator body (Fig. 1, Fig 2).

4. Remove the two screws, which attach the upper hinge to the appliance door (Fig. 3). Take special

care and hold the appliance door vertically.

5. Holding the door, swing the upper door hinge away from the door using the other hand (Fig. 4).

Be especially careful during this step, as the hinge may close and cause injury.

CHANGING THE DIRECTION OF THE DOOR OPENING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amica UM1303 in the language / languages: English as an attachment in your email.

The manual is 2.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amica UM1303 Manual

Product: