790780
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
OPERATION
Stop’n go function "II"
Stop’n go function acts like a pause. The Stop’n go function simultaneously suspends opera-
tion of all cooking zones and then resumes at the heat settings that were previously set.
In order to activate the Stop’n go function, at least one cooking zone must be in use.(cook-
ing zones must not be active)
Next, touch the Stop’n go function sensor eld (7) for 3 seconds. "II" will be shown on all
cooking zone displays (3).
In order to deactivate the Stop’n go function, touch the Stop’n go function sensor eld (7)
for 3 seconds until you hear a beep, and then touch anywhere on sensor (2) Cooking zone
displays (3) will show the heat setting that was previously set before activation of the Stop’n
go function.
Keeping food warm
Keep warm function allows for keeping food warm on a cooking zone. The selected cook-
ing zone operates at a low heat setting. With this feature, ready to serve, warm food retains
its taste and does not stick to the pot's bottom. This function can be used to melt butter or
chocolate.
For the keep food warm function to operate correctly, use a flat base pot or frying pan, so
that base temperature is accurately measured by the temperature sensor fitted in the cooking
zone. The Keep Warm function can be activated for any cooking zone. Due to a risk of the
growth of microorganisms, it is not recommended to keep food warm for a long time, so the
Keep Warm function is switched off after 2 hours.
The different keep warm temperatures can be set for cooking zone, namely 42°C, 70°C or
94°C.
To activate Keep Warm function:
Touch sensor (9) to select the cooking zone, then touch Keep Warm function sensor
eld (7) and the display will show the ( ) symbol indicating that temperature of 42°C
is selected,
Touch Keep Warm function sensor eld (7) again and the second ( ) symbol will be
shown indicating that temperature of 70°C is selected,
Touch Keep Warm function sensor eld (7) again and the third ( ) symbol will be shown
indicating that temperature of 94°C is selected,
To turn off the Keep Warm function at any time touch sensor (2) to reduce heat setting
to "0" or touch sensor (7).
The Stop’n go function can be activated for a maximum of 10 minutes. If the
Stop’n go function is not deactivated within this time, the appliance or will
switch itself off.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica PI6544RSTF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica PI6544RSTF in the language / languages: English as an attachment in your email.

The manual is 0.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info