790780
19
Zoom out
Zoom in
Previous page
1/36
Next page
19
OPERATION
Control Panel
Immediately after the appliance is connected to electrical mains, all displays will light up
briey. Your induction hob is then ready for use.
The induction hob is equipped with electronic touch control sensor elds, which are
operated by touching with a nger for at least 1 second.
Touching of a sensor eld is accompanied by an acoustic signal to acknowledge.
No objects should be placed on the sensor elds (this could cause an error). Touch
sensor elds should be always kept clean.
Switch on the cooking zone
Once the appliance is switched on using the on/off touch sensor (1), select a cooking zone
(1) within the next 15 seconds.
1. When a cooking zone selection sensor eld (9) is touched, "0" on the corresponding heat
setting indicator display will become bright.
2. To select the desired heat setting, slide your nger across the setting selection sensor eld
(2).
Switch on the appliance
To switch on the appliance touch and hold the on/off sensor eld (1) for at least 1 second. The
appliance is on, the display around sensor (4) will show the digits 1-9 and P, and the cooking
zone display where a pan is detected shows "0."
If none of the sensor elds is touched within 15 seconds, the appliance switches
itself off.
Heat setting selection sensor (2) is a slider type touch control sensor allowing selection of
heat setting (1-9 and P) by touching and sliding your nger across the marked area (2):
- sliding right - increase the heat setting
- sliding left - reduce the heat setting.
It is also possible to select the heat setting directly by touching the appropriate part of the
heat setting selection sensor eld (2).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica PI6544RSTF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica PI6544RSTF in the language / languages: English as an attachment in your email.

The manual is 0.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info